This is a note to let you know that I've just added the patch titled
hwmon: (tmp513) Fix division of negative numbers
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
hwmon-tmp513-fix-division-of-negative-numbers.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit efeae011b1e62afcbb290f011e4e835d2027e54a
Author: David Lechner <dlechner@xxxxxxxxxxxx>
Date: Tue Jan 14 15:45:52 2025 -0600
hwmon: (tmp513) Fix division of negative numbers
[ Upstream commit e2c68cea431d65292b592c9f8446c918d45fcf78 ]
Fix several issues with division of negative numbers in the tmp513
driver.
The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative
value by an unsigned type is undefined behavior. The driver was doing
this in several places, i.e. data->shunt_uohms has type of u32. The
actual "undefined" behavior is that it converts both values to unsigned
before doing the division, for example:
int ret = DIV_ROUND_CLOSEST(-100, 3U);
results in ret == 1431655732 instead of -33.
Furthermore the MILLI macro has a type of unsigned long. Multiplying a
signed long by an unsigned long results in an unsigned long.
So, we need to cast both MILLI and data data->shunt_uohms to long when
using the DIV_ROUND_CLOSEST macro.
Fixes: f07f9d2467f4 ("hwmon: (tmp513) Use SI constants from units.h")
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20250114-fix-si-prefix-macro-sign-bugs-v1-1-696fd8d10f00@xxxxxxxxxxxx
[groeck: Drop some continuation lines]
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/hwmon/tmp513.c b/drivers/hwmon/tmp513.c
index 070f93226ed69..62d31aadda4bb 100644
--- a/drivers/hwmon/tmp513.c
+++ b/drivers/hwmon/tmp513.c
@@ -203,7 +203,8 @@ static int tmp51x_get_value(struct tmp51x_data *data, u8 reg, u8 pos,
*val = sign_extend32(regval,
reg == TMP51X_SHUNT_CURRENT_RESULT ?
16 - tmp51x_get_pga_shift(data) : 15);
- *val = DIV_ROUND_CLOSEST(*val * 10 * MILLI, data->shunt_uohms);
+ *val = DIV_ROUND_CLOSEST(*val * 10 * (long)MILLI, (long)data->shunt_uohms);
+
break;
case TMP51X_BUS_VOLTAGE_RESULT:
case TMP51X_BUS_VOLTAGE_H_LIMIT:
@@ -219,7 +220,7 @@ static int tmp51x_get_value(struct tmp51x_data *data, u8 reg, u8 pos,
case TMP51X_BUS_CURRENT_RESULT:
// Current = (ShuntVoltage * CalibrationRegister) / 4096
*val = sign_extend32(regval, 15) * (long)data->curr_lsb_ua;
- *val = DIV_ROUND_CLOSEST(*val, MILLI);
+ *val = DIV_ROUND_CLOSEST(*val, (long)MILLI);
break;
case TMP51X_LOCAL_TEMP_RESULT:
case TMP51X_REMOTE_TEMP_RESULT_1:
@@ -259,7 +260,7 @@ static int tmp51x_set_value(struct tmp51x_data *data, u8 reg, long val)
* The user enter current value and we convert it to
* voltage. 1lsb = 10uV
*/
- val = DIV_ROUND_CLOSEST(val * data->shunt_uohms, 10 * MILLI);
+ val = DIV_ROUND_CLOSEST(val * (long)data->shunt_uohms, 10 * (long)MILLI);
max_val = U16_MAX >> tmp51x_get_pga_shift(data);
regval = clamp_val(val, -max_val, max_val);
break;
