This is a note to let you know that I've just added the patch titled
net: ti: icssg-prueth: Fix firmware load sequence.
to the 6.12-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-ti-icssg-prueth-fix-firmware-load-sequence.patch
and it can be found in the queue-6.12 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit c673e922db3a373fbbdc39bd2929314a1f09f397
Author: MD Danish Anwar <danishanwar@xxxxxx>
Date: Mon Dec 23 20:45:49 2024 +0530
net: ti: icssg-prueth: Fix firmware load sequence.
[ Upstream commit 9facce84f4062f782ebde18daa7006a23d40b607 ]
Timesync related operations are ran in PRU0 cores for both ICSSG SLICE0
and SLICE1. Currently whenever any ICSSG interface comes up we load the
respective firmwares to PRU cores and whenever interface goes down, we
stop the resective cores. Due to this, when SLICE0 goes down while
SLICE1 is still active, PRU0 firmwares are unloaded and PRU0 core is
stopped. This results in clock jump for SLICE1 interface as the timesync
related operations are no longer running.
As there are interdependencies between SLICE0 and SLICE1 firmwares,
fix this by running both PRU0 and PRU1 firmwares as long as at least 1
ICSSG interface is up. Add new flag in prueth struct to check if all
firmwares are running and remove the old flag (fw_running).
Use emacs_initialized as reference count to load the firmwares for the
first and last interface up/down. Moving init_emac_mode and fw_offload_mode
API outside of icssg_config to icssg_common_start API as they need
to be called only once per firmware boot.
Change prueth_emac_restart() to return error code and add error prints
inside the caller of this functions in case of any failures.
Move prueth_emac_stop() from common to sr1 driver.
sr1 and sr2 drivers have different logic handling for stopping
the firmwares. While sr1 driver is dependent on emac structure
to stop the corresponding pru cores for that slice, for sr2
all the pru cores of both the slices are stopped and is not
dependent on emac. So the prueth_emac_stop() function is no
longer common and can be moved to sr1 driver.
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx>
Signed-off-by: Meghana Malladi <m-malladi@xxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
index fdebeb2f84e0..74f0f200a89d 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_common.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
@@ -855,31 +855,6 @@ irqreturn_t prueth_rx_irq(int irq, void *dev_id)
}
EXPORT_SYMBOL_GPL(prueth_rx_irq);
-void prueth_emac_stop(struct prueth_emac *emac)
-{
- struct prueth *prueth = emac->prueth;
- int slice;
-
- switch (emac->port_id) {
- case PRUETH_PORT_MII0:
- slice = ICSS_SLICE0;
- break;
- case PRUETH_PORT_MII1:
- slice = ICSS_SLICE1;
- break;
- default:
- netdev_err(emac->ndev, "invalid port\n");
- return;
- }
-
- emac->fw_running = 0;
- if (!emac->is_sr1)
- rproc_shutdown(prueth->txpru[slice]);
- rproc_shutdown(prueth->rtu[slice]);
- rproc_shutdown(prueth->pru[slice]);
-}
-EXPORT_SYMBOL_GPL(prueth_emac_stop);
-
void prueth_cleanup_tx_ts(struct prueth_emac *emac)
{
int i;
diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
index 5d2491c2943a..ddfd1c02a885 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_config.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
@@ -397,7 +397,7 @@ static int prueth_emac_buffer_setup(struct prueth_emac *emac)
return 0;
}
-static void icssg_init_emac_mode(struct prueth *prueth)
+void icssg_init_emac_mode(struct prueth *prueth)
{
/* When the device is configured as a bridge and it is being brought
* back to the emac mode, the host mac address has to be set as 0.
@@ -406,9 +406,6 @@ static void icssg_init_emac_mode(struct prueth *prueth)
int i;
u8 mac[ETH_ALEN] = { 0 };
- if (prueth->emacs_initialized)
- return;
-
/* Set VLAN TABLE address base */
regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK,
addr << SMEM_VLAN_OFFSET);
@@ -423,15 +420,13 @@ static void icssg_init_emac_mode(struct prueth *prueth)
/* Clear host MAC address */
icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
}
+EXPORT_SYMBOL_GPL(icssg_init_emac_mode);
-static void icssg_init_fw_offload_mode(struct prueth *prueth)
+void icssg_init_fw_offload_mode(struct prueth *prueth)
{
u32 addr = prueth->shram.pa + EMAC_ICSSG_SWITCH_DEFAULT_VLAN_TABLE_OFFSET;
int i;
- if (prueth->emacs_initialized)
- return;
-
/* Set VLAN TABLE address base */
regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK,
addr << SMEM_VLAN_OFFSET);
@@ -448,6 +443,7 @@ static void icssg_init_fw_offload_mode(struct prueth *prueth)
icssg_class_set_host_mac_addr(prueth->miig_rt, prueth->hw_bridge_dev->dev_addr);
icssg_set_pvid(prueth, prueth->default_vlan, PRUETH_PORT_HOST);
}
+EXPORT_SYMBOL_GPL(icssg_init_fw_offload_mode);
int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
{
@@ -455,11 +451,6 @@ int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
struct icssg_flow_cfg __iomem *flow_cfg;
int ret;
- if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
- icssg_init_fw_offload_mode(prueth);
- else
- icssg_init_emac_mode(prueth);
-
memset_io(config, 0, TAS_GATE_MASK_LIST0);
icssg_miig_queues_init(prueth, slice);
@@ -786,3 +777,27 @@ void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port)
writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT0_DEFAULT_VLAN_OFFSET);
}
EXPORT_SYMBOL_GPL(icssg_set_pvid);
+
+int emac_fdb_flow_id_updated(struct prueth_emac *emac)
+{
+ struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 };
+ int slice = prueth_emac_slice(emac);
+ struct mgmt_cmd fdb_cmd = { 0 };
+ int ret;
+
+ fdb_cmd.header = ICSSG_FW_MGMT_CMD_HEADER;
+ fdb_cmd.type = ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW;
+ fdb_cmd.seqnum = ++(emac->prueth->icssg_hwcmdseq);
+ fdb_cmd.param = 0;
+
+ fdb_cmd.param |= (slice << 4);
+ fdb_cmd.cmd_args[0] = 0;
+
+ ret = icssg_send_fdb_msg(emac, &fdb_cmd, &fdb_cmd_rsp);
+ if (ret)
+ return ret;
+
+ WARN_ON(fdb_cmd.seqnum != fdb_cmd_rsp.seqnum);
+ return fdb_cmd_rsp.status == 1 ? 0 : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(emac_fdb_flow_id_updated);
diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
index 92c2deaa3068..c884e9fa099e 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_config.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
@@ -55,6 +55,7 @@ struct icssg_rxq_ctx {
#define ICSSG_FW_MGMT_FDB_CMD_TYPE 0x03
#define ICSSG_FW_MGMT_CMD_TYPE 0x04
#define ICSSG_FW_MGMT_PKT 0x80000000
+#define ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW 0x05
struct icssg_r30_cmd {
u32 cmd[4];
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index fe2fd1bfc904..cb11635a8d12 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -164,11 +164,26 @@ static struct icssg_firmwares icssg_emac_firmwares[] = {
}
};
-static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
+static int prueth_start(struct rproc *rproc, const char *fw_name)
+{
+ int ret;
+
+ ret = rproc_set_firmware(rproc, fw_name);
+ if (ret)
+ return ret;
+ return rproc_boot(rproc);
+}
+
+static void prueth_shutdown(struct rproc *rproc)
+{
+ rproc_shutdown(rproc);
+}
+
+static int prueth_emac_start(struct prueth *prueth)
{
struct icssg_firmwares *firmwares;
struct device *dev = prueth->dev;
- int slice, ret;
+ int ret, slice;
if (prueth->is_switch_mode)
firmwares = icssg_switch_firmwares;
@@ -177,49 +192,126 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
else
firmwares = icssg_emac_firmwares;
- slice = prueth_emac_slice(emac);
- if (slice < 0) {
- netdev_err(emac->ndev, "invalid port\n");
- return -EINVAL;
+ for (slice = 0; slice < PRUETH_NUM_MACS; slice++) {
+ ret = prueth_start(prueth->pru[slice], firmwares[slice].pru);
+ if (ret) {
+ dev_err(dev, "failed to boot PRU%d: %d\n", slice, ret);
+ goto unwind_slices;
+ }
+
+ ret = prueth_start(prueth->rtu[slice], firmwares[slice].rtu);
+ if (ret) {
+ dev_err(dev, "failed to boot RTU%d: %d\n", slice, ret);
+ rproc_shutdown(prueth->pru[slice]);
+ goto unwind_slices;
+ }
+
+ ret = prueth_start(prueth->txpru[slice], firmwares[slice].txpru);
+ if (ret) {
+ dev_err(dev, "failed to boot TX_PRU%d: %d\n", slice, ret);
+ rproc_shutdown(prueth->rtu[slice]);
+ rproc_shutdown(prueth->pru[slice]);
+ goto unwind_slices;
+ }
}
- ret = icssg_config(prueth, emac, slice);
- if (ret)
- return ret;
+ return 0;
- ret = rproc_set_firmware(prueth->pru[slice], firmwares[slice].pru);
- ret = rproc_boot(prueth->pru[slice]);
- if (ret) {
- dev_err(dev, "failed to boot PRU%d: %d\n", slice, ret);
- return -EINVAL;
+unwind_slices:
+ while (--slice >= 0) {
+ prueth_shutdown(prueth->txpru[slice]);
+ prueth_shutdown(prueth->rtu[slice]);
+ prueth_shutdown(prueth->pru[slice]);
}
- ret = rproc_set_firmware(prueth->rtu[slice], firmwares[slice].rtu);
- ret = rproc_boot(prueth->rtu[slice]);
- if (ret) {
- dev_err(dev, "failed to boot RTU%d: %d\n", slice, ret);
- goto halt_pru;
+ return ret;
+}
+
+static void prueth_emac_stop(struct prueth *prueth)
+{
+ int slice;
+
+ for (slice = 0; slice < PRUETH_NUM_MACS; slice++) {
+ prueth_shutdown(prueth->txpru[slice]);
+ prueth_shutdown(prueth->rtu[slice]);
+ prueth_shutdown(prueth->pru[slice]);
}
+}
+
+static int prueth_emac_common_start(struct prueth *prueth)
+{
+ struct prueth_emac *emac;
+ int ret = 0;
+ int slice;
+
+ if (!prueth->emac[ICSS_SLICE0] && !prueth->emac[ICSS_SLICE1])
+ return -EINVAL;
+
+ /* clear SMEM and MSMC settings for all slices */
+ memset_io(prueth->msmcram.va, 0, prueth->msmcram.size);
+ memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS);
+
+ icssg_class_default(prueth->miig_rt, ICSS_SLICE0, 0, false);
+ icssg_class_default(prueth->miig_rt, ICSS_SLICE1, 0, false);
+
+ if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
+ icssg_init_fw_offload_mode(prueth);
+ else
+ icssg_init_emac_mode(prueth);
+
+ for (slice = 0; slice < PRUETH_NUM_MACS; slice++) {
+ emac = prueth->emac[slice];
+ if (!emac)
+ continue;
+ ret = icssg_config(prueth, emac, slice);
+ if (ret)
+ goto disable_class;
+ }
+
+ ret = prueth_emac_start(prueth);
+ if (ret)
+ goto disable_class;
- ret = rproc_set_firmware(prueth->txpru[slice], firmwares[slice].txpru);
- ret = rproc_boot(prueth->txpru[slice]);
+ emac = prueth->emac[ICSS_SLICE0] ? prueth->emac[ICSS_SLICE0] :
+ prueth->emac[ICSS_SLICE1];
+ ret = icss_iep_init(emac->iep, &prueth_iep_clockops,
+ emac, IEP_DEFAULT_CYCLE_TIME_NS);
if (ret) {
- dev_err(dev, "failed to boot TX_PRU%d: %d\n", slice, ret);
- goto halt_rtu;
+ dev_err(prueth->dev, "Failed to initialize IEP module\n");
+ goto stop_pruss;
}
- emac->fw_running = 1;
return 0;
-halt_rtu:
- rproc_shutdown(prueth->rtu[slice]);
+stop_pruss:
+ prueth_emac_stop(prueth);
-halt_pru:
- rproc_shutdown(prueth->pru[slice]);
+disable_class:
+ icssg_class_disable(prueth->miig_rt, ICSS_SLICE0);
+ icssg_class_disable(prueth->miig_rt, ICSS_SLICE1);
return ret;
}
+static int prueth_emac_common_stop(struct prueth *prueth)
+{
+ struct prueth_emac *emac;
+
+ if (!prueth->emac[ICSS_SLICE0] && !prueth->emac[ICSS_SLICE1])
+ return -EINVAL;
+
+ icssg_class_disable(prueth->miig_rt, ICSS_SLICE0);
+ icssg_class_disable(prueth->miig_rt, ICSS_SLICE1);
+
+ prueth_emac_stop(prueth);
+
+ emac = prueth->emac[ICSS_SLICE0] ? prueth->emac[ICSS_SLICE0] :
+ prueth->emac[ICSS_SLICE1];
+ icss_iep_exit(emac->iep);
+
+ return 0;
+}
+
/* called back by PHY layer if there is change in link state of hw port*/
static void emac_adjust_link(struct net_device *ndev)
{
@@ -374,9 +466,6 @@ static void prueth_iep_settime(void *clockops_data, u64 ns)
u32 cycletime;
int timeout;
- if (!emac->fw_running)
- return;
-
sc_descp = emac->prueth->shram.va + TIMESYNC_FW_WC_SETCLOCK_DESC_OFFSET;
cycletime = IEP_DEFAULT_CYCLE_TIME_NS;
@@ -543,23 +632,17 @@ static int emac_ndo_open(struct net_device *ndev)
{
struct prueth_emac *emac = netdev_priv(ndev);
int ret, i, num_data_chn = emac->tx_ch_num;
+ struct icssg_flow_cfg __iomem *flow_cfg;
struct prueth *prueth = emac->prueth;
int slice = prueth_emac_slice(emac);
struct device *dev = prueth->dev;
int max_rx_flows;
int rx_flow;
- /* clear SMEM and MSMC settings for all slices */
- if (!prueth->emacs_initialized) {
- memset_io(prueth->msmcram.va, 0, prueth->msmcram.size);
- memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS);
- }
-
/* set h/w MAC as user might have re-configured */
ether_addr_copy(emac->mac_addr, ndev->dev_addr);
icssg_class_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
- icssg_class_default(prueth->miig_rt, slice, 0, false);
icssg_ft1_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
/* Notify the stack of the actual queue counts. */
@@ -597,18 +680,23 @@ static int emac_ndo_open(struct net_device *ndev)
goto cleanup_napi;
}
- /* reset and start PRU firmware */
- ret = prueth_emac_start(prueth, emac);
- if (ret)
- goto free_rx_irq;
+ if (!prueth->emacs_initialized) {
+ ret = prueth_emac_common_start(prueth);
+ if (ret)
+ goto free_rx_irq;
+ }
- icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu);
+ flow_cfg = emac->dram.va + ICSSG_CONFIG_OFFSET + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
+ writew(emac->rx_flow_id_base, &flow_cfg->rx_base_flow);
+ ret = emac_fdb_flow_id_updated(emac);
- if (!prueth->emacs_initialized) {
- ret = icss_iep_init(emac->iep, &prueth_iep_clockops,
- emac, IEP_DEFAULT_CYCLE_TIME_NS);
+ if (ret) {
+ netdev_err(ndev, "Failed to update Rx Flow ID %d", ret);
+ goto stop;
}
+ icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu);
+
ret = request_threaded_irq(emac->tx_ts_irq, NULL, prueth_tx_ts_irq,
IRQF_ONESHOT, dev_name(dev), emac);
if (ret)
@@ -653,7 +741,8 @@ static int emac_ndo_open(struct net_device *ndev)
free_tx_ts_irq:
free_irq(emac->tx_ts_irq, emac);
stop:
- prueth_emac_stop(emac);
+ if (!prueth->emacs_initialized)
+ prueth_emac_common_stop(prueth);
free_rx_irq:
free_irq(emac->rx_chns.irq[rx_flow], emac);
cleanup_napi:
@@ -689,8 +778,6 @@ static int emac_ndo_stop(struct net_device *ndev)
if (ndev->phydev)
phy_stop(ndev->phydev);
- icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac));
-
if (emac->prueth->is_hsr_offload_mode)
__dev_mc_unsync(ndev, icssg_prueth_hsr_del_mcast);
else
@@ -728,11 +815,9 @@ static int emac_ndo_stop(struct net_device *ndev)
/* Destroying the queued work in ndo_stop() */
cancel_delayed_work_sync(&emac->stats_work);
- if (prueth->emacs_initialized == 1)
- icss_iep_exit(emac->iep);
-
/* stop PRUs */
- prueth_emac_stop(emac);
+ if (prueth->emacs_initialized == 1)
+ prueth_emac_common_stop(prueth);
free_irq(emac->tx_ts_irq, emac);
@@ -1010,10 +1095,11 @@ static void prueth_offload_fwd_mark_update(struct prueth *prueth)
}
}
-static void prueth_emac_restart(struct prueth *prueth)
+static int prueth_emac_restart(struct prueth *prueth)
{
struct prueth_emac *emac0 = prueth->emac[PRUETH_MAC0];
struct prueth_emac *emac1 = prueth->emac[PRUETH_MAC1];
+ int ret;
/* Detach the net_device for both PRUeth ports*/
if (netif_running(emac0->ndev))
@@ -1022,36 +1108,46 @@ static void prueth_emac_restart(struct prueth *prueth)
netif_device_detach(emac1->ndev);
/* Disable both PRUeth ports */
- icssg_set_port_state(emac0, ICSSG_EMAC_PORT_DISABLE);
- icssg_set_port_state(emac1, ICSSG_EMAC_PORT_DISABLE);
+ ret = icssg_set_port_state(emac0, ICSSG_EMAC_PORT_DISABLE);
+ ret |= icssg_set_port_state(emac1, ICSSG_EMAC_PORT_DISABLE);
+ if (ret)
+ return ret;
/* Stop both pru cores for both PRUeth ports*/
- prueth_emac_stop(emac0);
- prueth->emacs_initialized--;
- prueth_emac_stop(emac1);
- prueth->emacs_initialized--;
+ ret = prueth_emac_common_stop(prueth);
+ if (ret) {
+ dev_err(prueth->dev, "Failed to stop the firmwares");
+ return ret;
+ }
/* Start both pru cores for both PRUeth ports */
- prueth_emac_start(prueth, emac0);
- prueth->emacs_initialized++;
- prueth_emac_start(prueth, emac1);
- prueth->emacs_initialized++;
+ ret = prueth_emac_common_start(prueth);
+ if (ret) {
+ dev_err(prueth->dev, "Failed to start the firmwares");
+ return ret;
+ }
/* Enable forwarding for both PRUeth ports */
- icssg_set_port_state(emac0, ICSSG_EMAC_PORT_FORWARD);
- icssg_set_port_state(emac1, ICSSG_EMAC_PORT_FORWARD);
+ ret = icssg_set_port_state(emac0, ICSSG_EMAC_PORT_FORWARD);
+ ret |= icssg_set_port_state(emac1, ICSSG_EMAC_PORT_FORWARD);
/* Attache net_device for both PRUeth ports */
netif_device_attach(emac0->ndev);
netif_device_attach(emac1->ndev);
+
+ return ret;
}
static void icssg_change_mode(struct prueth *prueth)
{
struct prueth_emac *emac;
- int mac;
+ int mac, ret;
- prueth_emac_restart(prueth);
+ ret = prueth_emac_restart(prueth);
+ if (ret) {
+ dev_err(prueth->dev, "Failed to restart the firmwares, aborting the process");
+ return;
+ }
for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) {
emac = prueth->emac[mac];
@@ -1130,13 +1226,18 @@ static void prueth_netdevice_port_unlink(struct net_device *ndev)
{
struct prueth_emac *emac = netdev_priv(ndev);
struct prueth *prueth = emac->prueth;
+ int ret;
prueth->br_members &= ~BIT(emac->port_id);
if (prueth->is_switch_mode) {
prueth->is_switch_mode = false;
emac->port_vlan = 0;
- prueth_emac_restart(prueth);
+ ret = prueth_emac_restart(prueth);
+ if (ret) {
+ dev_err(prueth->dev, "Failed to restart the firmwares, aborting the process");
+ return;
+ }
}
prueth_offload_fwd_mark_update(prueth);
@@ -1185,6 +1286,7 @@ static void prueth_hsr_port_unlink(struct net_device *ndev)
struct prueth *prueth = emac->prueth;
struct prueth_emac *emac0;
struct prueth_emac *emac1;
+ int ret;
emac0 = prueth->emac[PRUETH_MAC0];
emac1 = prueth->emac[PRUETH_MAC1];
@@ -1195,7 +1297,11 @@ static void prueth_hsr_port_unlink(struct net_device *ndev)
emac0->port_vlan = 0;
emac1->port_vlan = 0;
prueth->hsr_dev = NULL;
- prueth_emac_restart(prueth);
+ ret = prueth_emac_restart(prueth);
+ if (ret) {
+ dev_err(prueth->dev, "Failed to restart the firmwares, aborting the process");
+ return;
+ }
netdev_dbg(ndev, "Disabling HSR Offload mode\n");
}
}
@@ -1370,13 +1476,10 @@ static int prueth_probe(struct platform_device *pdev)
prueth->pa_stats = NULL;
}
- if (eth0_node) {
+ if (eth0_node || eth1_node) {
ret = prueth_get_cores(prueth, ICSS_SLICE0, false);
if (ret)
goto put_cores;
- }
-
- if (eth1_node) {
ret = prueth_get_cores(prueth, ICSS_SLICE1, false);
if (ret)
goto put_cores;
@@ -1575,14 +1678,12 @@ static int prueth_probe(struct platform_device *pdev)
pruss_put(prueth->pruss);
put_cores:
- if (eth1_node) {
- prueth_put_cores(prueth, ICSS_SLICE1);
- of_node_put(eth1_node);
- }
-
- if (eth0_node) {
+ if (eth0_node || eth1_node) {
prueth_put_cores(prueth, ICSS_SLICE0);
of_node_put(eth0_node);
+
+ prueth_put_cores(prueth, ICSS_SLICE1);
+ of_node_put(eth1_node);
}
return ret;
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index f5c1d473e9f9..5473315ea204 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -140,7 +140,6 @@ struct prueth_rx_chn {
/* data for each emac port */
struct prueth_emac {
bool is_sr1;
- bool fw_running;
struct prueth *prueth;
struct net_device *ndev;
u8 mac_addr[6];
@@ -361,6 +360,8 @@ int icssg_set_port_state(struct prueth_emac *emac,
enum icssg_port_state_cmd state);
void icssg_config_set_speed(struct prueth_emac *emac);
void icssg_config_half_duplex(struct prueth_emac *emac);
+void icssg_init_emac_mode(struct prueth *prueth);
+void icssg_init_fw_offload_mode(struct prueth *prueth);
/* Buffer queue helpers */
int icssg_queue_pop(struct prueth *prueth, u8 queue);
@@ -377,6 +378,7 @@ void icssg_vtbl_modify(struct prueth_emac *emac, u8 vid, u8 port_mask,
u8 untag_mask, bool add);
u16 icssg_get_pvid(struct prueth_emac *emac);
void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port);
+int emac_fdb_flow_id_updated(struct prueth_emac *emac);
#define prueth_napi_to_tx_chn(pnapi) \
container_of(pnapi, struct prueth_tx_chn, napi_tx)
@@ -407,7 +409,6 @@ void emac_rx_timestamp(struct prueth_emac *emac,
struct sk_buff *skb, u32 *psdata);
enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev);
irqreturn_t prueth_rx_irq(int irq, void *dev_id);
-void prueth_emac_stop(struct prueth_emac *emac);
void prueth_cleanup_tx_ts(struct prueth_emac *emac);
int icssg_napi_rx_poll(struct napi_struct *napi_rx, int budget);
int prueth_prepare_rx_chan(struct prueth_emac *emac,
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c b/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
index 292f04d29f4f..f88cdc8f012f 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
@@ -440,7 +440,6 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
goto halt_pru;
}
- emac->fw_running = 1;
return 0;
halt_pru:
@@ -449,6 +448,29 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
return ret;
}
+static void prueth_emac_stop(struct prueth_emac *emac)
+{
+ struct prueth *prueth = emac->prueth;
+ int slice;
+
+ switch (emac->port_id) {
+ case PRUETH_PORT_MII0:
+ slice = ICSS_SLICE0;
+ break;
+ case PRUETH_PORT_MII1:
+ slice = ICSS_SLICE1;
+ break;
+ default:
+ netdev_err(emac->ndev, "invalid port\n");
+ return;
+ }
+
+ if (!emac->is_sr1)
+ rproc_shutdown(prueth->txpru[slice]);
+ rproc_shutdown(prueth->rtu[slice]);
+ rproc_shutdown(prueth->pru[slice]);
+}
+
/**
* emac_ndo_open - EMAC device open
* @ndev: network adapter device
