This is a note to let you know that I've just added the patch titled
can: m_can: set init flag earlier in probe
to the 6.12-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
can-m_can-set-init-flag-earlier-in-probe.patch
and it can be found in the queue-6.12 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 21e74217e78b2ce3b0ca75a537742297a08b6f98
Author: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
Date: Mon Oct 7 10:23:58 2024 +0200
can: m_can: set init flag earlier in probe
[ Upstream commit fca2977629f49dee437e217c3fc423b6e0cad98c ]
While an m_can controller usually already has the init flag from a
hardware reset, no such reset happens on the integrated m_can_pci of the
Intel Elkhart Lake. If the CAN controller is found in an active state,
m_can_dev_setup() would fail because m_can_niso_supported() calls
m_can_cccr_update_bits(), which refuses to modify any other configuration
bits when CCCR_INIT is not set.
To avoid this issue, set CCCR_INIT before attempting to modify any other
configuration flags.
Fixes: cd5a46ce6fa6 ("can: m_can: don't enable transceiver when probing")
Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
Reviewed-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
Link: https://patch.msgid.link/e247f331cb72829fcbdfda74f31a59cbad1a6006.1728288535.git.matthias.schiffer@xxxxxxxxxxxxxxx
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 533bcb77c9f9..67c404fbe166 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1695,6 +1695,14 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
return -EINVAL;
}
+ /* Write the INIT bit, in case no hardware reset has happened before
+ * the probe (for example, it was observed that the Intel Elkhart Lake
+ * SoCs do not properly reset the CAN controllers on reboot)
+ */
+ err = m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);
+ if (err)
+ return err;
+
if (!cdev->is_peripheral)
netif_napi_add(dev, &cdev->napi, m_can_poll);
@@ -1746,11 +1754,7 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
return -EINVAL;
}
- /* Forcing standby mode should be redundant, as the chip should be in
- * standby after a reset. Write the INIT bit anyways, should the chip
- * be configured by previous stage.
- */
- return m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);
+ return 0;
}
static void m_can_stop(struct net_device *dev)
