Patch "net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries" has been added to the 6.6-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries

to the 6.6-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     net-dsa-microchip-ksz9896-register-regmap-alignment-.patch
and it can be found in the queue-6.6 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit e5fea8fd7d9c1c9f3c329dc2f41de77a6508c524
Author: Jesse Van Gavere <jesseevg@xxxxxxxxx>
Date:   Wed Dec 11 10:29:32 2024 +0100

    net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
    
    [ Upstream commit 5af53577c64fa84da032d490b701127fe8d1a6aa ]
    
    Commit 8d7ae22ae9f8 ("net: dsa: microchip: KSZ9477 register regmap
    alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range
    did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix
    for KSZ9896 is adapted from there as the same errata is present in
    KSZ9896C as "Module 5: Certain PHY registers must be written as pairs
    instead of singly" the explanation below is likewise taken from this
    commit.
    
    The commit provided code
    to apply "Module 6: Certain PHY registers must be written as pairs instead
    of singly" errata for KSZ9477 as this chip for certain PHY registers
    (0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead
    of 16 or 8 bit access.
    Otherwise, adjacent registers (no matter if reserved or not) are
    overwritten with 0x0.
    
    Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
    bit access are out of valid regmap ranges.
    
    As a result, following error is observed and KSZ9896 is not properly
    configured:
    
    ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
    ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
    ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
    ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0
    
    The solution is to modify regmap_reg_range to allow accesses with 4 bytes
    boundaries.
    
    Fixes: 5c844d57aa78 ("net: dsa: microchip: fix writes to phy registers >= 0x10")
    Signed-off-by: Jesse Van Gavere <jesse.vangavere@xxxxxxxxxxx>
    Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@xxxxxxxxxxx
    Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 1c3f18649998..997c225dfba4 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -892,10 +892,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
 	regmap_reg_range(0x1030, 0x1030),
 	regmap_reg_range(0x1100, 0x1115),
 	regmap_reg_range(0x111a, 0x111f),
-	regmap_reg_range(0x1122, 0x1127),
-	regmap_reg_range(0x112a, 0x112b),
-	regmap_reg_range(0x1136, 0x1139),
-	regmap_reg_range(0x113e, 0x113f),
+	regmap_reg_range(0x1120, 0x112b),
+	regmap_reg_range(0x1134, 0x113b),
+	regmap_reg_range(0x113c, 0x113f),
 	regmap_reg_range(0x1400, 0x1401),
 	regmap_reg_range(0x1403, 0x1403),
 	regmap_reg_range(0x1410, 0x1417),
@@ -922,10 +921,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
 	regmap_reg_range(0x2030, 0x2030),
 	regmap_reg_range(0x2100, 0x2115),
 	regmap_reg_range(0x211a, 0x211f),
-	regmap_reg_range(0x2122, 0x2127),
-	regmap_reg_range(0x212a, 0x212b),
-	regmap_reg_range(0x2136, 0x2139),
-	regmap_reg_range(0x213e, 0x213f),
+	regmap_reg_range(0x2120, 0x212b),
+	regmap_reg_range(0x2134, 0x213b),
+	regmap_reg_range(0x213c, 0x213f),
 	regmap_reg_range(0x2400, 0x2401),
 	regmap_reg_range(0x2403, 0x2403),
 	regmap_reg_range(0x2410, 0x2417),
@@ -952,10 +950,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
 	regmap_reg_range(0x3030, 0x3030),
 	regmap_reg_range(0x3100, 0x3115),
 	regmap_reg_range(0x311a, 0x311f),
-	regmap_reg_range(0x3122, 0x3127),
-	regmap_reg_range(0x312a, 0x312b),
-	regmap_reg_range(0x3136, 0x3139),
-	regmap_reg_range(0x313e, 0x313f),
+	regmap_reg_range(0x3120, 0x312b),
+	regmap_reg_range(0x3134, 0x313b),
+	regmap_reg_range(0x313c, 0x313f),
 	regmap_reg_range(0x3400, 0x3401),
 	regmap_reg_range(0x3403, 0x3403),
 	regmap_reg_range(0x3410, 0x3417),
@@ -982,10 +979,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
 	regmap_reg_range(0x4030, 0x4030),
 	regmap_reg_range(0x4100, 0x4115),
 	regmap_reg_range(0x411a, 0x411f),
-	regmap_reg_range(0x4122, 0x4127),
-	regmap_reg_range(0x412a, 0x412b),
-	regmap_reg_range(0x4136, 0x4139),
-	regmap_reg_range(0x413e, 0x413f),
+	regmap_reg_range(0x4120, 0x412b),
+	regmap_reg_range(0x4134, 0x413b),
+	regmap_reg_range(0x413c, 0x413f),
 	regmap_reg_range(0x4400, 0x4401),
 	regmap_reg_range(0x4403, 0x4403),
 	regmap_reg_range(0x4410, 0x4417),
@@ -1012,10 +1008,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
 	regmap_reg_range(0x5030, 0x5030),
 	regmap_reg_range(0x5100, 0x5115),
 	regmap_reg_range(0x511a, 0x511f),
-	regmap_reg_range(0x5122, 0x5127),
-	regmap_reg_range(0x512a, 0x512b),
-	regmap_reg_range(0x5136, 0x5139),
-	regmap_reg_range(0x513e, 0x513f),
+	regmap_reg_range(0x5120, 0x512b),
+	regmap_reg_range(0x5134, 0x513b),
+	regmap_reg_range(0x513c, 0x513f),
 	regmap_reg_range(0x5400, 0x5401),
 	regmap_reg_range(0x5403, 0x5403),
 	regmap_reg_range(0x5410, 0x5417),
@@ -1042,10 +1037,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
 	regmap_reg_range(0x6030, 0x6030),
 	regmap_reg_range(0x6100, 0x6115),
 	regmap_reg_range(0x611a, 0x611f),
-	regmap_reg_range(0x6122, 0x6127),
-	regmap_reg_range(0x612a, 0x612b),
-	regmap_reg_range(0x6136, 0x6139),
-	regmap_reg_range(0x613e, 0x613f),
+	regmap_reg_range(0x6120, 0x612b),
+	regmap_reg_range(0x6134, 0x613b),
+	regmap_reg_range(0x613c, 0x613f),
 	regmap_reg_range(0x6300, 0x6301),
 	regmap_reg_range(0x6400, 0x6401),
 	regmap_reg_range(0x6403, 0x6403),




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux