This is a note to let you know that I've just added the patch titled
drm/vc4: hvs: Set AXI panic modes for the HVS
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-vc4-hvs-set-axi-panic-modes-for-the-hvs.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 4f0413113fd38edff3e90664214b4becd90e3079
Author: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Date: Fri Jun 21 16:20:30 2024 +0100
drm/vc4: hvs: Set AXI panic modes for the HVS
[ Upstream commit 014eccc9da7bfc76a3107fceea37dd60f1d63630 ]
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Reviewed-by: Maxime Ripard <mripard@xxxxxxxxxx>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-7-dave.stevenson@xxxxxxxxxxxxxxx
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 82c8eda2d4358..88442cb65915f 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -910,6 +910,17 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
SCALER_DISPCTRL_SCLEIRQ);
+ /* Set AXI panic mode.
+ * VC4 panics when < 2 lines in FIFO.
+ * VC5 panics when less than 1 line in the FIFO.
+ */
+ dispctrl &= ~(SCALER_DISPCTRL_PANIC0_MASK |
+ SCALER_DISPCTRL_PANIC1_MASK |
+ SCALER_DISPCTRL_PANIC2_MASK);
+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC0);
+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1);
+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2);
+
/* Set AXI panic mode.
* VC4 panics when < 2 lines in FIFO.
* VC5 panics when less than 1 line in the FIFO.
