This is a note to let you know that I've just added the patch titled
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed regulators
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-mediatek-mt8183-kukui-jacuzzi-add-supplies.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit dfa259d807f62bbebe8c8ceeb492ab094cca091c
Author: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
Date: Wed Oct 30 15:02:22 2024 +0800
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed regulators
[ Upstream commit aaecb1da58a72bfbd2c35d4aadc43caa02f11862 ]
When the fixed regulators for the LCD panel and DP bridge were added,
their supplies were not modeled in. These, except for the 1.0V supply,
are just load switches, and need and have a supply.
Add the supplies for each of the fixed regulators.
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20241030070224.1006331-4-wenst@xxxxxxxxxxxx
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index beec6f0e4f274..629c4b7ecbc62 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -20,6 +20,7 @@ pp1000_mipibrdg: pp1000-mipibrdg {
regulator-boot-on;
gpio = <&pio 54 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp1800_alw>;
};
pp1800_mipibrdg: pp1800-mipibrdg {
@@ -32,6 +33,7 @@ pp1800_mipibrdg: pp1800-mipibrdg {
regulator-boot-on;
gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp1800_alw>;
};
pp3300_panel: pp3300-panel {
@@ -46,6 +48,7 @@ pp3300_panel: pp3300-panel {
regulator-boot-on;
gpio = <&pio 35 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300_alw>;
};
pp3300_mipibrdg: pp3300-mipibrdg {
@@ -58,6 +61,7 @@ pp3300_mipibrdg: pp3300-mipibrdg {
regulator-boot-on;
gpio = <&pio 37 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300_alw>;
};
volume_buttons: volume-buttons {
