This is a note to let you know that I've just added the patch titled
scsi: hisi_sas: Enable all PHYs that are not disabled by user during controller reset
to the 6.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
scsi-hisi_sas-enable-all-phys-that-are-not-disabled-.patch
and it can be found in the queue-6.11 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit abb0fe4edf3d47e7df26e39dd24f6014696d6df4
Author: Yihang Li <liyihang9@xxxxxxxxxx>
Date: Tue Oct 8 10:18:13 2024 +0800
scsi: hisi_sas: Enable all PHYs that are not disabled by user during controller reset
[ Upstream commit 08a07dc71d7fc6f58c35c4fc0bcede2811c5aa4c ]
For the controller reset operation(such as FLR or clear nexus ha in SCSI
EH), we will disable all PHYs and then enable PHY based on the
hisi_hba->phy_state obtained in hisi_sas_controller_reset_prepare(). If
the device is removed before controller reset or the PHY is not attached
to any device in directly attached scenario, the corresponding bit of
phy_state is not set. After controller reset done, the PHY is disabled.
The device cannot be identified even if user reconnect the disk.
Therefore, for PHYs that are not disabled by user, hisi_sas_phy_enable()
needs to be executed even if the corresponding bit of phy_state is not
set.
Fixes: 89954f024c3a ("scsi: hisi_sas: Ensure all enabled PHYs up during controller reset")
Signed-off-by: Yihang Li <liyihang9@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20241008021822.2617339-5-liyihang9@xxxxxxxxxx
Reviewed-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index ec1a3e7ee94d3..4a51db160ac8e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1545,10 +1545,16 @@ void hisi_sas_controller_reset_done(struct hisi_hba *hisi_hba)
/* Init and wait for PHYs to come up and all libsas event finished. */
for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
- if (!(hisi_hba->phy_state & BIT(phy_no)))
+ if (!sas_phy->phy->enabled)
continue;
+ if (!(hisi_hba->phy_state & BIT(phy_no))) {
+ hisi_sas_phy_enable(hisi_hba, phy_no, 1);
+ continue;
+ }
+
async_schedule_domain(hisi_sas_async_init_wait_phyup,
phy, &async);
}
