From: Roy Luo <royluo@xxxxxxxxxx>
commit 897e13a8f9a23576eeacb95075fdded97b197cc3 upstream.
When dwc3_resume_common() returns an error, runtime pm is left in
suspended and disabled state in dwc3_resume(). Since the device
is suspended, its parent devices (like the power domain or glue
driver) could also be suspended and may have released resources
that dwc requires. Consequently, calling dwc3_suspend_common() in
this situation could result in attempts to access unclocked or
unpowered registers.
To prevent these problems, runtime PM should always be re-enabled,
even after failed resume attempts. This ensures that
dwc3_suspend_common() is skipped in such cases.
Fixes: 68c26fe58182 ("usb: dwc3: set pm runtime active before resume common")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Roy Luo <royluo@xxxxxxxxxx>
Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20240913232145.3507723-1-royluo@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -2562,7 +2562,7 @@ static int dwc3_suspend(struct device *d
static int dwc3_resume(struct device *dev)
{
struct dwc3 *dwc = dev_get_drvdata(dev);
- int ret;
+ int ret = 0;
pinctrl_pm_select_default_state(dev);
@@ -2570,14 +2570,12 @@ static int dwc3_resume(struct device *de
pm_runtime_set_active(dev);
ret = dwc3_resume_common(dwc, PMSG_RESUME);
- if (ret) {
+ if (ret)
pm_runtime_set_suspended(dev);
- return ret;
- }
pm_runtime_enable(dev);
- return 0;
+ return ret;
}
static void dwc3_complete(struct device *dev)
Patches currently in stable-queue which might be from royluo@xxxxxxxxxx are
queue-6.11/usb-dwc3-re-enable-runtime-pm-after-failed-resume.patch
