Patch "Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122" has been added to the 6.6-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122

to the 6.6-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     bluetooth-btusb-add-realtek-rtl8852c-support-id-0x04.patch
and it can be found in the queue-6.6 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 9c819c5325ee878b8ab646d69555e84d41a9d30c
Author: Hilda Wu <hildawu@xxxxxxxxxxx>
Date:   Fri Aug 16 16:58:22 2024 +0800

    Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
    
    [ Upstream commit bdf9557f70e7512bb2f754abf90d9e9958745316 ]
    
    Add the support ID (0x0489, 0xe122) to usb_device_id table for
    Realtek RTL8852C.
    
    The device info from /sys/kernel/debug/usb/devices as below.
    
    T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
    D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=0489 ProdID=e122 Rev= 0.00
    S:  Manufacturer=Realtek
    S:  Product=Bluetooth Radio
    S:  SerialNumber=00e04c000001
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    
    Signed-off-by: Hilda Wu <hildawu@xxxxxxxxxxx>
    Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0a58106207b0c..bc53da383f855 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -537,6 +537,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe122), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Realtek 8852BE Bluetooth devices */
 	{ USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK |




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux