From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
commit 3dedd4889cfc2851444a1f7626b293c0bfd1e42c upstream.
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@xxxxxxxxxxxxxxx
Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Parthiban Nallathambi <parthiban@xxxxxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
.../dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
index 6bb12e0bbc7e..50654dbf62e0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
@@ -339,14 +339,14 @@ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
};
pinctrl_uart1: uart1grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1
@@ -355,7 +355,7 @@ MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1
};
pinctrl_uart3: uart3grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1
@@ -364,21 +364,21 @@ MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1
};
pinctrl_uart4: uart4grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
>;
};
pinctrl_usb_otg1_id: usbotg1idgrp {
- fsl,pin = <
+ fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
>;
};
--
2.46.2
Patches currently in stable-queue which might be from krzysztof.kozlowski@xxxxxxxxxx are
queue-6.10/reset-k210-fix-of-node-leak-in-probe-error-path.patch
queue-6.10/dt-bindings-spi-nxp-fspi-add-imx8ulp-support.patch
queue-6.10/power-supply-axp20x_battery-remove-design-from-min-a.patch
queue-6.10/arm-dts-imx6ul-geam-fix-fsl-pins-property-in-tscgrp-pinctrl.patch
queue-6.10/arm64-dts-exynos-exynos7885-jackpotlte-correct-ram-a.patch
queue-6.10/soc-versatile-integrator-fix-of-node-leak-in-probe-error-path.patch
queue-6.10/reset-berlin-fix-of-node-leak-in-probe-error-path.patch
queue-6.10/iio-magnetometer-ak8975-drop-incorrect-ak09116-compa.patch
queue-6.10/bus-integrator-lm-fix-of-node-leak-in-probe.patch
queue-6.10/power-supply-max17042_battery-fix-soc-threshold-calc.patch
queue-6.10/arm-versatile-fix-of-node-leak-in-cpus-prepare.patch
queue-6.10/dt-bindings-iio-asahi-kasei-ak8975-drop-incorrect-ak.patch
queue-6.10/arm-dts-imx7d-zii-rmu2-fix-ethernet-phy-pinctrl-prop.patch
queue-6.10/arm-dts-imx6ull-seeed-npi-fix-fsl-pins-property-in-tscgrp-pinctrl.patch
queue-6.10/cpuidle-riscv-sbi-use-scoped-device-node-handling-to-fix-missing-of_node_put.patch
