This is a note to let you know that I've just added the patch titled
net: phy: aquantia: fix applying active_low bit after reset
to the 6.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-phy-aquantia-fix-applying-active_low-bit-after-r.patch
and it can be found in the queue-6.11 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 8eeb053c19cafd943f212b6eb58fc9f91db7ac5f
Author: Daniel Golle <daniel@xxxxxxxxxxxxxx>
Date: Tue Sep 17 14:49:55 2024 +0100
net: phy: aquantia: fix applying active_low bit after reset
[ Upstream commit 6f9defaf99122d1af9c2562181c77bc99be0672d ]
for_each_set_bit was used wrongly in aqr107_config_init() when iterating
over LEDs. Drop misleading 'index' variable and call
aqr_phy_led_active_low_set() for each set bit representing an LED which
is driven by VDD instead of GND pin.
Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
Reviewed-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
Link: https://patch.msgid.link/9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@xxxxxxxxxxxxxx
Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 57b8b8f400fd4..4d156d406bab9 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -489,7 +489,7 @@ static int aqr107_config_init(struct phy_device *phydev)
{
struct aqr107_priv *priv = phydev->priv;
u32 led_active_low;
- int ret, index = 0;
+ int ret;
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
@@ -516,10 +516,9 @@ static int aqr107_config_init(struct phy_device *phydev)
/* Restore LED polarity state after reset */
for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) {
- ret = aqr_phy_led_active_low_set(phydev, index, led_active_low);
+ ret = aqr_phy_led_active_low_set(phydev, led_active_low, true);
if (ret)
return ret;
- index++;
}
return 0;
