This is a note to let you know that I've just added the patch titled
net: dsa: felix: ignore pending status of TAS module when it's disabled
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-dsa-felix-ignore-pending-status-of-tas-module-wh.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit fa0f91a3956e4fda6534cefc711b6155367c8bcf
Author: Xiaoliang Yang <xiaoliang.yang_1@xxxxxxx>
Date: Fri Sep 6 17:35:50 2024 +0800
net: dsa: felix: ignore pending status of TAS module when it's disabled
[ Upstream commit 70654f4c212e83898feced125d91ebb3695950d8 ]
The TAS module could not be configured when it's running in pending
status. We need disable the module and configure it again. However, the
pending status is not cleared after the module disabled. TC taprio set
will always return busy even it's disabled.
For example, a user uses tc-taprio to configure Qbv and a future
basetime. The TAS module will run in a pending status. There is no way
to reconfigure Qbv, it always returns busy.
Actually the TAS module can be reconfigured when it's disabled. So it
doesn't need to check the pending status if the TAS module is disabled.
After the patch, user can delete the tc taprio configuration to disable
Qbv and reconfigure it again.
Fixes: de143c0e274b ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload")
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@xxxxxxx>
Link: https://patch.msgid.link/20240906093550.29985-1-xiaoliang.yang_1@xxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 3c5509e75a54..afb5dae4439c 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1474,10 +1474,13 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
/* Hardware errata - Admin config could not be overwritten if
* config is pending, need reset the TAS module
*/
- val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
- if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) {
- ret = -EBUSY;
- goto err_reset_tc;
+ val = ocelot_read_rix(ocelot, QSYS_TAG_CONFIG, port);
+ if (val & QSYS_TAG_CONFIG_ENABLE) {
+ val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
+ if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) {
+ ret = -EBUSY;
+ goto err_reset_tc;
+ }
}
ocelot_rmw_rix(ocelot,
