From: "Matthieu Baerts (NGI0)" <matttbe@xxxxxxxxxx> By accident, some patches modifying the MPTCP selftests have been applied twice, using different versions of the patch [1]. These patches have been dropped, but it looks like quilt incorrectly handled that by placing the new subtests at the wrong place: in userspace_tests() instead of endpoint_tests(). That caused a few other patches not to apply properly. Not to have to revert and re-apply patches, this issue can be fixed by moving some code around. Link: https://lore.kernel.org/fc21db4a-508d-41db-aa45-e3bc06d18ce7@xxxxxxxxxx [1] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 138 ++++++++++++------------ 1 file changed, 69 insertions(+), 69 deletions(-) --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -3236,75 +3236,6 @@ userspace_tests() chk_join_nr 1 1 1 chk_rm_nr 0 1 fi - - # remove and re-add - if reset "delete re-add signal" && - mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then - pm_nl_set_limits $ns1 0 3 - pm_nl_set_limits $ns2 3 3 - pm_nl_add_endpoint $ns1 10.0.2.1 id 1 flags signal - # broadcast IP: no packet for this address will be received on ns1 - pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal - pm_nl_add_endpoint $ns1 10.0.1.1 id 42 flags signal - run_tests $ns1 $ns2 10.0.1.1 4 0 0 speed_20 2>/dev/null & - local tests_pid=$! - - wait_mpj $ns2 - chk_subflow_nr needtitle "before delete" 2 - - pm_nl_del_endpoint $ns1 1 10.0.2.1 - pm_nl_del_endpoint $ns1 2 224.0.0.1 - sleep 0.5 - chk_subflow_nr "" "after delete" 1 - - pm_nl_add_endpoint $ns1 10.0.2.1 id 1 flags signal - pm_nl_add_endpoint $ns1 10.0.3.1 id 2 flags signal - wait_mpj $ns2 - chk_subflow_nr "" "after re-add" 3 - - pm_nl_del_endpoint $ns1 42 10.0.1.1 - sleep 0.5 - chk_subflow_nr "" "after delete ID 0" 2 - - pm_nl_add_endpoint $ns1 10.0.1.1 id 99 flags signal - wait_mpj $ns2 - chk_subflow_nr "" "after re-add" 3 - kill_tests_wait - - chk_join_nr 4 4 4 - chk_add_nr 5 5 - chk_rm_nr 3 2 invert - fi - - # flush and re-add - if reset_with_tcp_filter "flush re-add" ns2 10.0.3.2 REJECT OUTPUT && - mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then - pm_nl_set_limits $ns1 0 2 - pm_nl_set_limits $ns2 1 2 - # broadcast IP: no packet for this address will be received on ns1 - pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal - pm_nl_add_endpoint $ns2 10.0.3.2 id 3 flags subflow - run_tests $ns1 $ns2 10.0.1.1 4 0 0 speed_20 2>/dev/null & - local tests_pid=$! - - wait_attempt_fail $ns2 - chk_subflow_nr needtitle "before flush" 1 - - pm_nl_flush_endpoint $ns2 - pm_nl_flush_endpoint $ns1 - wait_rm_addr $ns2 0 - ip netns exec "${ns2}" ${iptables} -D OUTPUT -s "10.0.3.2" -p tcp -j REJECT - pm_nl_add_endpoint $ns2 10.0.3.2 id 3 flags subflow - wait_mpj $ns2 - pm_nl_add_endpoint $ns1 10.0.3.1 id 2 flags signal - wait_mpj $ns2 - kill_wait "${tests_pid}" - kill_tests_wait - - chk_join_nr 2 2 2 - chk_add_nr 2 2 - chk_rm_nr 1 0 invert - fi } endpoint_tests() @@ -3375,6 +3306,75 @@ endpoint_tests() chk_join_nr 6 6 6 chk_rm_nr 4 4 fi + + # remove and re-add + if reset "delete re-add signal" && + mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then + pm_nl_set_limits $ns1 0 3 + pm_nl_set_limits $ns2 3 3 + pm_nl_add_endpoint $ns1 10.0.2.1 id 1 flags signal + # broadcast IP: no packet for this address will be received on ns1 + pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal + pm_nl_add_endpoint $ns1 10.0.1.1 id 42 flags signal + run_tests $ns1 $ns2 10.0.1.1 4 0 0 speed_20 2>/dev/null & + local tests_pid=$! + + wait_mpj $ns2 + chk_subflow_nr needtitle "before delete" 2 + + pm_nl_del_endpoint $ns1 1 10.0.2.1 + pm_nl_del_endpoint $ns1 2 224.0.0.1 + sleep 0.5 + chk_subflow_nr "" "after delete" 1 + + pm_nl_add_endpoint $ns1 10.0.2.1 id 1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 id 2 flags signal + wait_mpj $ns2 + chk_subflow_nr "" "after re-add" 3 + + pm_nl_del_endpoint $ns1 42 10.0.1.1 + sleep 0.5 + chk_subflow_nr "" "after delete ID 0" 2 + + pm_nl_add_endpoint $ns1 10.0.1.1 id 99 flags signal + wait_mpj $ns2 + chk_subflow_nr "" "after re-add" 3 + kill_tests_wait + + chk_join_nr 4 4 4 + chk_add_nr 5 5 + chk_rm_nr 3 2 invert + fi + + # flush and re-add + if reset_with_tcp_filter "flush re-add" ns2 10.0.3.2 REJECT OUTPUT && + mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 2 + # broadcast IP: no packet for this address will be received on ns1 + pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal + pm_nl_add_endpoint $ns2 10.0.3.2 id 3 flags subflow + run_tests $ns1 $ns2 10.0.1.1 4 0 0 speed_20 2>/dev/null & + local tests_pid=$! + + wait_attempt_fail $ns2 + chk_subflow_nr needtitle "before flush" 1 + + pm_nl_flush_endpoint $ns2 + pm_nl_flush_endpoint $ns1 + wait_rm_addr $ns2 0 + ip netns exec "${ns2}" ${iptables} -D OUTPUT -s "10.0.3.2" -p tcp -j REJECT + pm_nl_add_endpoint $ns2 10.0.3.2 id 3 flags subflow + wait_mpj $ns2 + pm_nl_add_endpoint $ns1 10.0.3.1 id 2 flags signal + wait_mpj $ns2 + kill_wait "${tests_pid}" + kill_tests_wait + + chk_join_nr 2 2 2 + chk_add_nr 2 2 + chk_rm_nr 1 0 invert + fi } # [$1: error message] Patches currently in stable-queue which might be from matttbe@xxxxxxxxxx are queue-6.1/selftests-mptcp-join-validate-event-numbers.patch queue-6.1/selftests-mptcp-join-check-re-re-adding-id-0-signal.patch queue-6.1/selftests-mptcp-fix-backport-issues.patch
