This is a note to let you know that I've just added the patch titled
drm/bridge: tc358768: Attempt to fix DSI horizontal timings
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-bridge-tc358768-attempt-to-fix-dsi-horizontal-ti.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 9ae2e4069249a445ae063d1fb32017d9331fd747
Author: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
Date: Wed Sep 6 09:50:59 2023 +0300
drm/bridge: tc358768: Attempt to fix DSI horizontal timings
[ Upstream commit 9fc75c40faa29df14ba16066be6bdfaea9f39ce4 ]
The DSI horizontal timing calculations done by the driver seem to often
lead to underflows or overflows, depending on the videomode.
There are two main things the current driver doesn't seem to get right:
DSI HSW and HFP, and VSDly. However, even following Toshiba's
documentation it seems we don't always get a working display.
This patch attempts to fix the horizontal timings for DSI event mode, and
on a system with a DSI->HDMI encoder, a lot of standard HDMI modes now
seem to work. The work relies on Toshiba's documentation, but also quite
a bit on empirical testing.
This also adds timing related debug prints to make it easier to improve
on this later.
The DSI pulse mode has only been tested with a fixed-resolution panel,
which limits the testing of different modes on DSI pulse mode. However,
as the VSDly calculation also affects pulse mode, so this might cause a
regression.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
Tested-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Tested-by: Maxim Schwalm <maxim.schwalm@xxxxxxxxx> # Asus TF700T
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
Signed-off-by: Robert Foss <rfoss@xxxxxxxxxx>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-12-31725f008a50@xxxxxxxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/gpu/drm/bridge/tc358768.c b/drivers/gpu/drm/bridge/tc358768.c
index 6eed5c4232956..c72d5fbbb0ec4 100644
--- a/drivers/gpu/drm/bridge/tc358768.c
+++ b/drivers/gpu/drm/bridge/tc358768.c
@@ -9,6 +9,7 @@
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
+#include <linux/math64.h>
#include <linux/media-bus-format.h>
#include <linux/minmax.h>
#include <linux/module.h>
@@ -157,6 +158,7 @@ struct tc358768_priv {
u32 frs; /* PLL Freqency range for HSCK (post divider) */
u32 dsiclk; /* pll_clk / 2 */
+ u32 pclk; /* incoming pclk rate */
};
static inline struct tc358768_priv *dsi_host_to_tc358768(struct mipi_dsi_host
@@ -380,6 +382,7 @@ static int tc358768_calc_pll(struct tc358768_priv *priv,
priv->prd = best_prd;
priv->frs = frs;
priv->dsiclk = best_pll / 2;
+ priv->pclk = mode->clock * 1000;
return 0;
}
@@ -638,6 +641,28 @@ static u32 tc358768_ps_to_ns(u32 ps)
return ps / 1000;
}
+static u32 tc358768_dpi_to_ns(u32 val, u32 pclk)
+{
+ return (u32)div_u64((u64)val * NANO, pclk);
+}
+
+/* Convert value in DPI pixel clock units to DSI byte count */
+static u32 tc358768_dpi_to_dsi_bytes(struct tc358768_priv *priv, u32 val)
+{
+ u64 m = (u64)val * priv->dsiclk / 4 * priv->dsi_lanes;
+ u64 n = priv->pclk;
+
+ return (u32)div_u64(m + n - 1, n);
+}
+
+static u32 tc358768_dsi_bytes_to_ns(struct tc358768_priv *priv, u32 val)
+{
+ u64 m = (u64)val * NANO;
+ u64 n = priv->dsiclk / 4 * priv->dsi_lanes;
+
+ return (u32)div_u64(m, n);
+}
+
static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
{
struct tc358768_priv *priv = bridge_to_tc358768(bridge);
@@ -647,11 +672,19 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
s32 raw_val;
const struct drm_display_mode *mode;
u32 hsbyteclk_ps, dsiclk_ps, ui_ps;
- u32 dsiclk, hsbyteclk, video_start;
- const u32 internal_delay = 40;
+ u32 dsiclk, hsbyteclk;
int ret, i;
struct videomode vm;
struct device *dev = priv->dev;
+ /* In pixelclock units */
+ u32 dpi_htot, dpi_data_start;
+ /* In byte units */
+ u32 dsi_dpi_htot, dsi_dpi_data_start;
+ u32 dsi_hsw, dsi_hbp, dsi_hact, dsi_hfp;
+ const u32 dsi_hss = 4; /* HSS is a short packet (4 bytes) */
+ /* In hsbyteclk units */
+ u32 dsi_vsdly;
+ const u32 internal_dly = 40;
if (mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
dev_warn_once(dev, "Non-continuous mode unimplemented, falling back to continuous\n");
@@ -686,27 +719,23 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
case MIPI_DSI_FMT_RGB888:
val |= (0x3 << 4);
hact = vm.hactive * 3;
- video_start = (vm.hsync_len + vm.hback_porch) * 3;
data_type = MIPI_DSI_PACKED_PIXEL_STREAM_24;
break;
case MIPI_DSI_FMT_RGB666:
val |= (0x4 << 4);
hact = vm.hactive * 3;
- video_start = (vm.hsync_len + vm.hback_porch) * 3;
data_type = MIPI_DSI_PACKED_PIXEL_STREAM_18;
break;
case MIPI_DSI_FMT_RGB666_PACKED:
val |= (0x4 << 4) | BIT(3);
hact = vm.hactive * 18 / 8;
- video_start = (vm.hsync_len + vm.hback_porch) * 18 / 8;
data_type = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
break;
case MIPI_DSI_FMT_RGB565:
val |= (0x5 << 4);
hact = vm.hactive * 2;
- video_start = (vm.hsync_len + vm.hback_porch) * 2;
data_type = MIPI_DSI_PACKED_PIXEL_STREAM_16;
break;
default:
@@ -716,9 +745,152 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
return;
}
+ /*
+ * There are three important things to make TC358768 work correctly,
+ * which are not trivial to manage:
+ *
+ * 1. Keep the DPI line-time and the DSI line-time as close to each
+ * other as possible.
+ * 2. TC358768 goes to LP mode after each line's active area. The DSI
+ * HFP period has to be long enough for entering and exiting LP mode.
+ * But it is not clear how to calculate this.
+ * 3. VSDly (video start delay) has to be long enough to ensure that the
+ * DSI TX does not start transmitting until we have started receiving
+ * pixel data from the DPI input. It is not clear how to calculate
+ * this either.
+ */
+
+ dpi_htot = vm.hactive + vm.hfront_porch + vm.hsync_len + vm.hback_porch;
+ dpi_data_start = vm.hsync_len + vm.hback_porch;
+
+ dev_dbg(dev, "dpi horiz timing (pclk): %u + %u + %u + %u = %u\n",
+ vm.hsync_len, vm.hback_porch, vm.hactive, vm.hfront_porch,
+ dpi_htot);
+
+ dev_dbg(dev, "dpi horiz timing (ns): %u + %u + %u + %u = %u\n",
+ tc358768_dpi_to_ns(vm.hsync_len, vm.pixelclock),
+ tc358768_dpi_to_ns(vm.hback_porch, vm.pixelclock),
+ tc358768_dpi_to_ns(vm.hactive, vm.pixelclock),
+ tc358768_dpi_to_ns(vm.hfront_porch, vm.pixelclock),
+ tc358768_dpi_to_ns(dpi_htot, vm.pixelclock));
+
+ dev_dbg(dev, "dpi data start (ns): %u + %u = %u\n",
+ tc358768_dpi_to_ns(vm.hsync_len, vm.pixelclock),
+ tc358768_dpi_to_ns(vm.hback_porch, vm.pixelclock),
+ tc358768_dpi_to_ns(dpi_data_start, vm.pixelclock));
+
+ dsi_dpi_htot = tc358768_dpi_to_dsi_bytes(priv, dpi_htot);
+ dsi_dpi_data_start = tc358768_dpi_to_dsi_bytes(priv, dpi_data_start);
+
+ if (dsi_dev->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
+ dsi_hsw = tc358768_dpi_to_dsi_bytes(priv, vm.hsync_len);
+ dsi_hbp = tc358768_dpi_to_dsi_bytes(priv, vm.hback_porch);
+ } else {
+ /* HBP is included in HSW in event mode */
+ dsi_hbp = 0;
+ dsi_hsw = tc358768_dpi_to_dsi_bytes(priv,
+ vm.hsync_len +
+ vm.hback_porch);
+
+ /*
+ * The pixel packet includes the actual pixel data, and:
+ * DSI packet header = 4 bytes
+ * DCS code = 1 byte
+ * DSI packet footer = 2 bytes
+ */
+ dsi_hact = hact + 4 + 1 + 2;
+
+ dsi_hfp = dsi_dpi_htot - dsi_hact - dsi_hsw - dsi_hss;
+
+ /*
+ * Here we should check if HFP is long enough for entering LP
+ * and exiting LP, but it's not clear how to calculate that.
+ * Instead, this is a naive algorithm that just adjusts the HFP
+ * and HSW so that HFP is (at least) roughly 2/3 of the total
+ * blanking time.
+ */
+ if (dsi_hfp < (dsi_hfp + dsi_hsw + dsi_hss) * 2 / 3) {
+ u32 old_hfp = dsi_hfp;
+ u32 old_hsw = dsi_hsw;
+ u32 tot = dsi_hfp + dsi_hsw + dsi_hss;
+
+ dsi_hsw = tot / 3;
+
+ /*
+ * Seems like sometimes HSW has to be divisible by num-lanes, but
+ * not always...
+ */
+ dsi_hsw = roundup(dsi_hsw, priv->dsi_lanes);
+
+ dsi_hfp = dsi_dpi_htot - dsi_hact - dsi_hsw - dsi_hss;
+
+ dev_dbg(dev,
+ "hfp too short, adjusting dsi hfp and dsi hsw from %u, %u to %u, %u\n",
+ old_hfp, old_hsw, dsi_hfp, dsi_hsw);
+ }
+
+ dev_dbg(dev,
+ "dsi horiz timing (bytes): %u, %u + %u + %u + %u = %u\n",
+ dsi_hss, dsi_hsw, dsi_hbp, dsi_hact, dsi_hfp,
+ dsi_hss + dsi_hsw + dsi_hbp + dsi_hact + dsi_hfp);
+
+ dev_dbg(dev, "dsi horiz timing (ns): %u + %u + %u + %u + %u = %u\n",
+ tc358768_dsi_bytes_to_ns(priv, dsi_hss),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hsw),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hbp),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hact),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hfp),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hss + dsi_hsw +
+ dsi_hbp + dsi_hact + dsi_hfp));
+ }
+
+ /* VSDly calculation */
+
+ /* Start with the HW internal delay */
+ dsi_vsdly = internal_dly;
+
+ /* Convert to byte units as the other variables are in byte units */
+ dsi_vsdly *= priv->dsi_lanes;
+
+ /* Do we need more delay, in addition to the internal? */
+ if (dsi_dpi_data_start > dsi_vsdly + dsi_hss + dsi_hsw + dsi_hbp) {
+ dsi_vsdly = dsi_dpi_data_start - dsi_hss - dsi_hsw - dsi_hbp;
+ dsi_vsdly = roundup(dsi_vsdly, priv->dsi_lanes);
+ }
+
+ dev_dbg(dev, "dsi data start (bytes) %u + %u + %u + %u = %u\n",
+ dsi_vsdly, dsi_hss, dsi_hsw, dsi_hbp,
+ dsi_vsdly + dsi_hss + dsi_hsw + dsi_hbp);
+
+ dev_dbg(dev, "dsi data start (ns) %u + %u + %u + %u = %u\n",
+ tc358768_dsi_bytes_to_ns(priv, dsi_vsdly),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hss),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hsw),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hbp),
+ tc358768_dsi_bytes_to_ns(priv, dsi_vsdly + dsi_hss + dsi_hsw + dsi_hbp));
+
+ /* Convert back to hsbyteclk */
+ dsi_vsdly /= priv->dsi_lanes;
+
+ /*
+ * The docs say that there is an internal delay of 40 cycles.
+ * However, we get underflows if we follow that rule. If we
+ * instead ignore the internal delay, things work. So either
+ * the docs are wrong or the calculations are wrong.
+ *
+ * As a temporary fix, add the internal delay here, to counter
+ * the subtraction when writing the register.
+ */
+ dsi_vsdly += internal_dly;
+
+ /* Clamp to the register max */
+ if (dsi_vsdly - internal_dly > 0x3ff) {
+ dev_warn(dev, "VSDly too high, underflows likely\n");
+ dsi_vsdly = 0x3ff + internal_dly;
+ }
+
/* VSDly[9:0] */
- video_start = max(video_start, internal_delay + 1) - internal_delay;
- tc358768_write(priv, TC358768_VSDLY, video_start);
+ tc358768_write(priv, TC358768_VSDLY, dsi_vsdly - internal_dly);
tc358768_write(priv, TC358768_DATAFMT, val);
tc358768_write(priv, TC358768_DSITX_DT, data_type);
@@ -826,18 +998,6 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
/* vbp */
tc358768_write(priv, TC358768_DSI_VBPR, vm.vback_porch);
-
- /* hsw * byteclk * ndl / pclk */
- val = (u32)div_u64(vm.hsync_len *
- (u64)hsbyteclk * priv->dsi_lanes,
- vm.pixelclock);
- tc358768_write(priv, TC358768_DSI_HSW, val);
-
- /* hbp * byteclk * ndl / pclk */
- val = (u32)div_u64(vm.hback_porch *
- (u64)hsbyteclk * priv->dsi_lanes,
- vm.pixelclock);
- tc358768_write(priv, TC358768_DSI_HBPR, val);
} else {
/* Set event mode */
tc358768_write(priv, TC358768_DSI_EVENT, 1);
@@ -851,16 +1011,13 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
/* vbp (not used in event mode) */
tc358768_write(priv, TC358768_DSI_VBPR, 0);
+ }
- /* (hsw + hbp) * byteclk * ndl / pclk */
- val = (u32)div_u64((vm.hsync_len + vm.hback_porch) *
- (u64)hsbyteclk * priv->dsi_lanes,
- vm.pixelclock);
- tc358768_write(priv, TC358768_DSI_HSW, val);
+ /* hsw (bytes) */
+ tc358768_write(priv, TC358768_DSI_HSW, dsi_hsw);
- /* hbp (not used in event mode) */
- tc358768_write(priv, TC358768_DSI_HBPR, 0);
- }
+ /* hbp (bytes) */
+ tc358768_write(priv, TC358768_DSI_HBPR, dsi_hbp);
/* hact (bytes) */
tc358768_write(priv, TC358768_DSI_HACT, hact);
