This is a note to let you know that I've just added the patch titled
gpio: mlxbf3: Support shutdown() function
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
gpio-mlxbf3-support-shutdown-function.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit a626bd82ad46414ae7a79c7d870e107cd7ad41c0
Author: Asmaa Mnebhi <asmaa@xxxxxxxxxx>
Date: Tue Jun 11 13:15:09 2024 -0400
gpio: mlxbf3: Support shutdown() function
[ Upstream commit aad41832326723627ad8ac9ee8a543b6dca4454d ]
During Linux graceful reboot, the GPIO interrupts are not disabled.
Since the drivers are not removed during graceful reboot,
the logic to call mlxbf3_gpio_irq_disable() is not triggered.
Interrupts that remain enabled can cause issues on subsequent boots.
For example, the mlxbf-gige driver contains PHY logic to bring up the link.
If the gpio-mlxbf3 driver loads first, the mlxbf-gige driver
will use a GPIO interrupt to bring up the link.
Otherwise, it will use polling.
The next time Linux boots and loads the drivers in this order, we encounter the issue:
- mlxbf-gige loads first and uses polling while the GPIO10
interrupt is still enabled from the previous boot. So if
the interrupt triggers, there is nothing to clear it.
- gpio-mlxbf3 loads.
- i2c-mlxbf loads. The interrupt doesn't trigger for I2C
because it is shared with the GPIO interrupt line which
was not cleared.
The solution is to add a shutdown function to the GPIO driver to clear and disable
all interrupts. Also clear the interrupt after disabling it in mlxbf3_gpio_irq_disable().
Fixes: 38a700efc510 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@xxxxxxxxxx>
Reviewed-by: David Thompson <davthompson@xxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy@xxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20240611171509.22151-1-asmaa@xxxxxxxxxx
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c
index d5906d419b0ab..10ea71273c891 100644
--- a/drivers/gpio/gpio-mlxbf3.c
+++ b/drivers/gpio/gpio-mlxbf3.c
@@ -39,6 +39,8 @@
#define MLXBF_GPIO_CAUSE_OR_EVTEN0 0x14
#define MLXBF_GPIO_CAUSE_OR_CLRCAUSE 0x18
+#define MLXBF_GPIO_CLR_ALL_INTS GENMASK(31, 0)
+
struct mlxbf3_gpio_context {
struct gpio_chip gc;
@@ -82,6 +84,8 @@ static void mlxbf3_gpio_irq_disable(struct irq_data *irqd)
val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
val &= ~BIT(offset);
writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
+
+ writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE);
raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
gpiochip_disable_irq(gc, offset);
@@ -253,6 +257,15 @@ static int mlxbf3_gpio_probe(struct platform_device *pdev)
return 0;
}
+static void mlxbf3_gpio_shutdown(struct platform_device *pdev)
+{
+ struct mlxbf3_gpio_context *gs = platform_get_drvdata(pdev);
+
+ /* Disable and clear all interrupts */
+ writel(0, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
+ writel(MLXBF_GPIO_CLR_ALL_INTS, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE);
+}
+
static const struct acpi_device_id mlxbf3_gpio_acpi_match[] = {
{ "MLNXBF33", 0 },
{}
@@ -265,6 +278,7 @@ static struct platform_driver mlxbf3_gpio_driver = {
.acpi_match_table = mlxbf3_gpio_acpi_match,
},
.probe = mlxbf3_gpio_probe,
+ .shutdown = mlxbf3_gpio_shutdown,
};
module_platform_driver(mlxbf3_gpio_driver);
