This is a note to let you know that I've just added the patch titled
spi: spi-fsl-lpspi: Fix scldiv calculation
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
spi-spi-fsl-lpspi-fix-scldiv-calculation.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit adfc9e20a1fbd6c5157d847d2a7fb26ee1ff2a67
Author: Stefan Wahren <wahrenst@xxxxxxx>
Date: Sun Aug 4 13:36:11 2024 +0200
spi: spi-fsl-lpspi: Fix scldiv calculation
[ Upstream commit 730bbfaf7d4890bd99e637db7767dc68cfeb24e7 ]
The effective SPI clock frequency should never exceed speed_hz
otherwise this might result in undefined behavior of the SPI device.
Currently the scldiv calculation could violate this constraint.
For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz,
the function fsl_lpspi_set_bitrate will determine perscale = 0 and
scldiv = 1, which is a effective SPI clock of 8 MHz.
So fix this by rounding up the quotient of perclk_rate and speed_hz.
While this never change within the loop, we can pull this out.
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@xxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 079035db7dd85..3c0f7dc9614d1 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -296,7 +296,7 @@ static void fsl_lpspi_set_watermark(struct fsl_lpspi_data *fsl_lpspi)
static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
{
struct lpspi_config config = fsl_lpspi->config;
- unsigned int perclk_rate, scldiv;
+ unsigned int perclk_rate, scldiv, div;
u8 prescale;
perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
@@ -313,8 +313,10 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
return -EINVAL;
}
+ div = DIV_ROUND_UP(perclk_rate, config.speed_hz);
+
for (prescale = 0; prescale < 8; prescale++) {
- scldiv = perclk_rate / config.speed_hz / (1 << prescale) - 2;
+ scldiv = div / (1 << prescale) - 2;
if (scldiv < 256) {
fsl_lpspi->config.prescale = prescale;
break;
