From: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
commit 813c18d1ca1987afaf47e035152e1baa1375b1b2 upstream.
phy-mode should be rgmii-id to match hardware configuration.
Also there should be a phy-handle to reference phy node.
Fixes: f8a11425075f ("MIPS: Loongson64: Add GMAC support for Loongson-2K1000")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
Signed-off-by: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -144,7 +144,8 @@
<13 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&liointc0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy1>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
@@ -167,7 +168,8 @@
<15 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&liointc0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy1>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
Patches currently in stable-queue which might be from jiaxun.yang@xxxxxxxxxxx are
queue-6.10/mips-loongson64-reset-prioritise-firmware-service.patch
queue-6.10/mips-loongson64-remove-memory-node-for-builtin-dtb.patch
queue-6.10/mips-fix-fallback-march-for-sb1.patch
queue-6.10/mips-ip30-ip30-console-add-missing-include.patch
queue-6.10/mips-loongson64-test-register-availability-before-use.patch
queue-6.10/platform-mips-cpu_hwmon-disable-driver-on-unsupported-hardware.patch
queue-6.10/mips-dts-loongson-add-isa-node.patch
queue-6.10/mips-dts-loongson-fix-gmac-phy-node.patch
queue-6.10/mips-loongson64-env-hook-up-loongsson-2k.patch
