Patch "ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node" has been added to the 5.15-stable tree

[Sasha Levin <sashal@xxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node

to the 5.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-dts-imx6qdl-kontron-samx6i-move-phy-reset-into-p.patch
and it can be found in the queue-5.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 409dc2cf83dcfd84fef8d7a1eae44f86acd6d36c
Author: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Date:   Tue Jul 26 15:05:20 2022 +0200

    ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node
    
    [ Upstream commit 5694eed98cca5c164ebb5b831b65b4c9eee4b2d5 ]
    
    Add ethernet-phy node so we can drop the deprecated fec phy-reset-gpios
    property. The reset-assert-us value is taken from the existing logic
    since the fec driver will add an 1ms assert delay per default if
    phy-reset-gpios is used and phy-reset-duration is not specified.
    
    Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
    Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
    Stable-dep-of: edfea889a049 ("ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset")
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index 683f6e58ab230..85aeebc9485dd 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -260,7 +260,19 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+		};
+	};
 };
 
 &hdmi {