Patch "arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S" has been added to the 6.6-stable tree

[Sasha Levin <sashal@xxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S

to the 6.6-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm64-dts-rockchip-fixes-phy-reset-for-lunzn-fastrhi.patch
and it can be found in the queue-6.6 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 7efb3622537d92dca4b65dca10b7bc0b54387e39
Author: Chukun Pan <amadeus@xxxxxxxxxx>
Date:   Sun Jun 30 23:00:07 2024 +0800

    arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S
    
    [ Upstream commit e261bd74000ca80e5483ba8a8bda509de8cbe7fd ]
    
    Fixed the PHY address and reset GPIOs (does not match the corresponding
    pinctrl) for gmac0 and gmac1.
    
    Fixes: b9f8ca655d80 ("arm64: dts: rockchip: Add Lunzn Fastrhino R68S")
    Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
    Link: https://lore.kernel.org/r/20240630150010.55729-7-amadeus@xxxxxxxxxx
    Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
index a3339186e89c8..ce2a5e1ccefc3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
@@ -39,7 +39,7 @@ &gmac0_tx_bus2
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -61,7 +61,7 @@ &gmac1m1_tx_bus2
 		     &gmac1m1_rx_bus2
 		     &gmac1m1_rgmii_clk
 		     &gmac1m1_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -71,18 +71,18 @@ &gmac1m1_rgmii_clk
 };
 
 &mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
+	rgmii_phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy0_reset_pin>;
 		pinctrl-names = "default";
 	};
 };
 
 &mdio1 {
-	rgmii_phy1: ethernet-phy@0 {
+	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy1_reset_pin>;
 		pinctrl-names = "default";
 	};