Patch "wifi: ath12k: fix firmware crash during reo reinject" has been added to the 6.10-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    wifi: ath12k: fix firmware crash during reo reinject

to the 6.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     wifi-ath12k-fix-firmware-crash-during-reo-reinject.patch
and it can be found in the queue-6.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit de4b633efc5a8774c8ab74aa4f3ed2149dc2409f
Author: P Praneesh <quic_ppranees@xxxxxxxxxxx>
Date:   Mon May 20 12:30:45 2024 +0530

    wifi: ath12k: fix firmware crash during reo reinject
    
    [ Upstream commit a57ab7cced454f69b8ee8aa5f5019ea8de4674da ]
    
    When handling fragmented packets, the ath12k driver reassembles each
    fragment into a normal packet and then reinjects it into the HW ring.
    However, a firmware crash occurs during this reinjection process.
    The issue arises because the driver populates peer metadata in
    reo_ent_ring->queue_addr_lo, while the firmware expects the physical
    address obtained from the corresponding peer’s queue descriptor. Fix it
    by filling peer's queue descriptor's physical address in queue_addr_lo.
    
    Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
    
    Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
    Signed-off-by: P Praneesh <quic_ppranees@xxxxxxxxxxx>
    Acked-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
    Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
    Link: https://msgid.link/20240520070045.631029-4-quic_ppranees@xxxxxxxxxxx
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
index 37e5bca9570fe..44e8d9d7834c4 100644
--- a/drivers/net/wireless/ath/ath12k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
@@ -2994,7 +2994,7 @@ static int ath12k_dp_rx_h_defrag_reo_reinject(struct ath12k *ar,
 	struct hal_srng *srng;
 	dma_addr_t link_paddr, buf_paddr;
 	u32 desc_bank, msdu_info, msdu_ext_info, mpdu_info;
-	u32 cookie, hal_rx_desc_sz, dest_ring_info0;
+	u32 cookie, hal_rx_desc_sz, dest_ring_info0, queue_addr_hi;
 	int ret;
 	struct ath12k_rx_desc_info *desc_info;
 	u8 dst_ind;
@@ -3086,13 +3086,11 @@ static int ath12k_dp_rx_h_defrag_reo_reinject(struct ath12k *ar,
 	reo_ent_ring->rx_mpdu_info.peer_meta_data =
 		reo_dest_ring->rx_mpdu_info.peer_meta_data;
 
-	/* Firmware expects physical address to be filled in queue_addr_lo in
-	 * the MLO scenario and in case of non MLO peer meta data needs to be
-	 * filled.
-	 * TODO: Need to handle for MLO scenario.
-	 */
-	reo_ent_ring->queue_addr_lo = reo_dest_ring->rx_mpdu_info.peer_meta_data;
-	reo_ent_ring->info0 = le32_encode_bits(dst_ind,
+	reo_ent_ring->queue_addr_lo = cpu_to_le32(lower_32_bits(rx_tid->paddr));
+	queue_addr_hi = upper_32_bits(rx_tid->paddr);
+	reo_ent_ring->info0 = le32_encode_bits(queue_addr_hi,
+					       HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI) |
+			      le32_encode_bits(dst_ind,
 					       HAL_REO_ENTR_RING_INFO0_DEST_IND);
 
 	reo_ent_ring->info1 = le32_encode_bits(rx_tid->cur_sn,




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux