From: Jason A. Donenfeld <Jason@xxxxxxxxx> commit 66063033f77e10b985258126a97573f84bb8d3b4 upstream. On some platforms, `char` is unsigned, but this driver, for the most part, assumed it was signed. In other places, it uses `char` to mean an unsigned number, but only in cases when the values are small. And in still other places, `char` is used as a boolean. Put an end to this confusion by declaring explicit types, depending on the context. Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Cc: Stanislaw Gruszka <stf_xl@xxxxx> Cc: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx> Cc: Kalle Valo <kvalo@xxxxxxxxxx> Signed-off-by: Jason A. Donenfeld <Jason@xxxxxxxxx> Acked-by: Stanislaw Gruszka <stf_xl@xxxxx> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxx> Link: https://lore.kernel.org/r/20221019155541.3410813-1-Jason@xxxxxxxxx Cc: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/wireless/ralink/rt2x00/rt2400pci.c | 8 ++--- drivers/net/wireless/ralink/rt2x00/rt2400pci.h | 2 - drivers/net/wireless/ralink/rt2x00/rt2500pci.c | 8 ++--- drivers/net/wireless/ralink/rt2x00/rt2500pci.h | 2 - drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 8 ++--- drivers/net/wireless/ralink/rt2x00/rt2500usb.h | 2 - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 36 ++++++++++++------------- drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 8 ++--- drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 6 ++-- drivers/net/wireless/ralink/rt2x00/rt61pci.c | 4 +- drivers/net/wireless/ralink/rt2x00/rt61pci.h | 2 - drivers/net/wireless/ralink/rt2x00/rt73usb.c | 4 +- drivers/net/wireless/ralink/rt2x00/rt73usb.h | 2 - 13 files changed, 46 insertions(+), 46 deletions(-) --- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c @@ -1023,9 +1023,9 @@ static int rt2400pci_set_state(struct rt { u32 reg, reg2; unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; + bool put_to_sleep; + u8 bbp_state; + u8 rf_state; put_to_sleep = (state != STATE_AWAKE); @@ -1561,7 +1561,7 @@ static int rt2400pci_probe_hw_mode(struc { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; - char *tx_power; + u8 *tx_power; unsigned int i; /* --- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.h @@ -939,7 +939,7 @@ #define DEFAULT_TXPOWER 39 #define __CLAMP_TX(__txpower) \ - clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER) + clamp_t(u8, (__txpower), MIN_TXPOWER, MAX_TXPOWER) #define TXPOWER_FROM_DEV(__txpower) \ ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER) --- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c @@ -1176,9 +1176,9 @@ static int rt2500pci_set_state(struct rt { u32 reg, reg2; unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; + bool put_to_sleep; + u8 bbp_state; + u8 rf_state; put_to_sleep = (state != STATE_AWAKE); @@ -1856,7 +1856,7 @@ static int rt2500pci_probe_hw_mode(struc { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; - char *tx_power; + u8 *tx_power; unsigned int i; /* --- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.h @@ -1219,6 +1219,6 @@ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) #define TXPOWER_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) + clamp_t(u8, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT2500PCI_H */ --- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c @@ -984,9 +984,9 @@ static int rt2500usb_set_state(struct rt u16 reg; u16 reg2; unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; + bool put_to_sleep; + u8 bbp_state; + u8 rf_state; put_to_sleep = (state != STATE_AWAKE); @@ -1663,7 +1663,7 @@ static int rt2500usb_probe_hw_mode(struc { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; - char *tx_power; + u8 *tx_power; unsigned int i; /* --- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.h @@ -839,6 +839,6 @@ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) #define TXPOWER_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) + clamp_t(u8, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT2500USB_H */ --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -3310,10 +3310,10 @@ static void rt2800_config_channel_rf53xx if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { /* r55/r59 value array of channel 1~14 */ - static const char r55_bt_rev[] = {0x83, 0x83, + static const u8 r55_bt_rev[] = {0x83, 0x83, 0x83, 0x73, 0x73, 0x63, 0x53, 0x53, 0x53, 0x43, 0x43, 0x43, 0x43, 0x43}; - static const char r59_bt_rev[] = {0x0e, 0x0e, + static const u8 r59_bt_rev[] = {0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07}; @@ -3322,7 +3322,7 @@ static void rt2800_config_channel_rf53xx rt2800_rfcsr_write(rt2x00dev, 59, r59_bt_rev[idx]); } else { - static const char r59_bt[] = {0x8b, 0x8b, 0x8b, + static const u8 r59_bt[] = {0x8b, 0x8b, 0x8b, 0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89, 0x88, 0x88, 0x86, 0x85, 0x84}; @@ -3330,10 +3330,10 @@ static void rt2800_config_channel_rf53xx } } else { if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { - static const char r55_nonbt_rev[] = {0x23, 0x23, + static const u8 r55_nonbt_rev[] = {0x23, 0x23, 0x23, 0x23, 0x13, 0x13, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03}; - static const char r59_nonbt_rev[] = {0x07, 0x07, + static const u8 r59_nonbt_rev[] = {0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x06, 0x05, 0x04, 0x04}; @@ -3344,14 +3344,14 @@ static void rt2800_config_channel_rf53xx } else if (rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392) || rt2x00_rt(rt2x00dev, RT6352)) { - static const char r59_non_bt[] = {0x8f, 0x8f, + static const u8 r59_non_bt[] = {0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d, 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86}; rt2800_rfcsr_write(rt2x00dev, 59, r59_non_bt[idx]); } else if (rt2x00_rt(rt2x00dev, RT5350)) { - static const char r59_non_bt[] = {0x0b, 0x0b, + static const u8 r59_non_bt[] = {0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0a, 0x0a, 0x09, 0x08, 0x07, 0x07, 0x06}; @@ -3974,23 +3974,23 @@ static void rt2800_iq_calibrate(struct r rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0); } -static char rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev, +static s8 rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev, unsigned int channel, - char txpower) + s8 txpower) { if (rt2x00_rt(rt2x00dev, RT3593) || rt2x00_rt(rt2x00dev, RT3883)) txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC); if (channel <= 14) - return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER); + return clamp_t(s8, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER); if (rt2x00_rt(rt2x00dev, RT3593) || rt2x00_rt(rt2x00dev, RT3883)) - return clamp_t(char, txpower, MIN_A_TXPOWER_3593, + return clamp_t(s8, txpower, MIN_A_TXPOWER_3593, MAX_A_TXPOWER_3593); else - return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER); + return clamp_t(s8, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER); } static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev, @@ -8492,11 +8492,11 @@ static int rt2800_rf_lp_config(struct rt return 0; } -static char rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev) +static s8 rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev) { unsigned int cnt; u8 bbp_val; - char cal_val; + s8 cal_val; rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x82); @@ -8528,7 +8528,7 @@ static void rt2800_bw_filter_calibration u8 rx_filter_target_20m = 0x27, rx_filter_target_40m = 0x31; int loop = 0, is_ht40, cnt; u8 bbp_val, rf_val; - char cal_r32_init, cal_r32_val, cal_diff; + s8 cal_r32_init, cal_r32_val, cal_diff; u8 saverfb5r00, saverfb5r01, saverfb5r03, saverfb5r04, saverfb5r05; u8 saverfb5r06, saverfb5r07; u8 saverfb5r08, saverfb5r17, saverfb5r18, saverfb5r19, saverfb5r20; @@ -9979,9 +9979,9 @@ static int rt2800_probe_hw_mode(struct r { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; - char *default_power1; - char *default_power2; - char *default_power3; + s8 *default_power1; + s8 *default_power2; + s8 *default_power3; unsigned int i, tx_chains, rx_chains; u32 reg; --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h @@ -22,10 +22,10 @@ struct rt2800_drv_data { u8 calibration_bw20; u8 calibration_bw40; - char rx_calibration_bw20; - char rx_calibration_bw40; - char tx_calibration_bw20; - char tx_calibration_bw40; + s8 rx_calibration_bw20; + s8 rx_calibration_bw40; + s8 tx_calibration_bw20; + s8 tx_calibration_bw40; u8 bbp25; u8 bbp26; u8 txmixer_gain_24g; --- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c @@ -117,12 +117,12 @@ int rt2x00usb_vendor_request_buff(struct const u16 buffer_length) { int status = 0; - unsigned char *tb; + u8 *tb; u16 off, len, bsize; mutex_lock(&rt2x00dev->csr_mutex); - tb = (char *)buffer; + tb = (u8 *)buffer; off = offset; len = buffer_length; while (len && !status) { @@ -215,7 +215,7 @@ void rt2x00usb_register_read_async(struc rd->cr.wLength = cpu_to_le16(sizeof(u32)); usb_fill_control_urb(urb, usb_dev, usb_rcvctrlpipe(usb_dev, 0), - (unsigned char *)(&rd->cr), &rd->reg, sizeof(rd->reg), + (u8 *)(&rd->cr), &rd->reg, sizeof(rd->reg), rt2x00usb_register_read_async_cb, rd); usb_anchor_urb(urb, rt2x00dev->anchor); if (usb_submit_urb(urb, GFP_ATOMIC) < 0) { --- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c +++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c @@ -1709,7 +1709,7 @@ static int rt61pci_set_state(struct rt2x { u32 reg, reg2; unsigned int i; - char put_to_sleep; + bool put_to_sleep; put_to_sleep = (state != STATE_AWAKE); @@ -2656,7 +2656,7 @@ static int rt61pci_probe_hw_mode(struct { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; - char *tx_power; + u8 *tx_power; unsigned int i; /* --- a/drivers/net/wireless/ralink/rt2x00/rt61pci.h +++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.h @@ -1484,6 +1484,6 @@ struct hw_pairwise_ta_entry { (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) #define TXPOWER_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) + clamp_t(u8, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT61PCI_H */ --- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c +++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c @@ -1378,7 +1378,7 @@ static int rt73usb_set_state(struct rt2x { u32 reg, reg2; unsigned int i; - char put_to_sleep; + bool put_to_sleep; put_to_sleep = (state != STATE_AWAKE); @@ -2090,7 +2090,7 @@ static int rt73usb_probe_hw_mode(struct { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; - char *tx_power; + u8 *tx_power; unsigned int i; /* --- a/drivers/net/wireless/ralink/rt2x00/rt73usb.h +++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.h @@ -1063,6 +1063,6 @@ struct hw_pairwise_ta_entry { (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) #define TXPOWER_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) + clamp_t(u8, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT73USB_H */ Patches currently in stable-queue which might be from Jason@xxxxxxxxx are queue-5.15/minmax-allow-comparisons-of-int-against-unsigned-char-short.patch queue-5.15/wifi-rt2x00-use-explicitly-signed-or-unsigned-types.patch queue-5.15/minmax-allow-min-max-clamp-if-the-arguments-have-the-same-signedness.patch queue-5.15/minmax-sanity-check-constant-bounds-when-clamping.patch queue-5.15/minmax-relax-check-to-allow-comparison-between-unsigned-arguments-and-signed-constants.patch queue-5.15/minmax-clamp-more-efficiently-by-avoiding-extra-comparison.patch
