This is a note to let you know that I've just added the patch titled net: stmmac: No need to calculate speed divider when offload is disabled to the 5.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: net-stmmac-no-need-to-calculate-speed-divider-when-o.patch and it can be found in the queue-5.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit b07ee72bb0dcfc0ef4ae675f79bbfe3966194b69 Author: Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx> Date: Mon Jun 17 09:39:22 2024 +0800 net: stmmac: No need to calculate speed divider when offload is disabled [ Upstream commit b8c43360f6e424131fa81d3ba8792ad8ff25a09e ] commit be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") introduced a problem. When deleting, it prompts "Invalid portTransmitRate 0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable. Only when offload is enabled, speed divider needs to be calculated. Fixes: be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") Signed-off-by: Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx> Reviewed-by: Simon Horman <horms@xxxxxxxxxx> Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@xxxxxxxxxxxxx Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index a9b5f5ad1bac4..b1a5a02bef08e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -356,24 +356,28 @@ static int tc_setup_cbs(struct stmmac_priv *priv, port_transmit_rate_kbps = qopt->idleslope - qopt->sendslope; - /* Port Transmit Rate and Speed Divider */ - switch (div_s64(port_transmit_rate_kbps, 1000)) { - case SPEED_10000: - case SPEED_5000: - ptr = 32; - break; - case SPEED_2500: - case SPEED_1000: - ptr = 8; - break; - case SPEED_100: - ptr = 4; - break; - default: - netdev_err(priv->dev, - "Invalid portTransmitRate %lld (idleSlope - sendSlope)\n", - port_transmit_rate_kbps); - return -EINVAL; + if (qopt->enable) { + /* Port Transmit Rate and Speed Divider */ + switch (div_s64(port_transmit_rate_kbps, 1000)) { + case SPEED_10000: + case SPEED_5000: + ptr = 32; + break; + case SPEED_2500: + case SPEED_1000: + ptr = 8; + break; + case SPEED_100: + ptr = 4; + break; + default: + netdev_err(priv->dev, + "Invalid portTransmitRate %lld (idleSlope - sendSlope)\n", + port_transmit_rate_kbps); + return -EINVAL; + } + } else { + ptr = 0; } mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use;