This is a note to let you know that I've just added the patch titled qca_spi: Make interrupt remembering atomic to the 6.6-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: qca_spi-make-interrupt-remembering-atomic.patch and it can be found in the queue-6.6 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit bf291220d375f938efe5142d7c2c6f2090098c39 Author: Stefan Wahren <wahrenst@xxxxxxx> Date: Fri Jun 14 16:50:30 2024 +0200 qca_spi: Make interrupt remembering atomic [ Upstream commit 2d7198278ece01818cd95a3beffbdf8b2a353fa0 ] The whole mechanism to remember occurred SPI interrupts is not atomic, which could lead to unexpected behavior. So fix this by using atomic bit operations instead. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx> Link: https://lore.kernel.org/r/20240614145030.7781-1-wahrenst@xxxxxxx Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c index 1822f2ad8f0dd..2ac1b1b96e6a4 100644 --- a/drivers/net/ethernet/qualcomm/qca_debug.c +++ b/drivers/net/ethernet/qualcomm/qca_debug.c @@ -111,10 +111,8 @@ qcaspi_info_show(struct seq_file *s, void *what) seq_printf(s, "IRQ : %d\n", qca->spi_dev->irq); - seq_printf(s, "INTR REQ : %u\n", - qca->intr_req); - seq_printf(s, "INTR SVC : %u\n", - qca->intr_svc); + seq_printf(s, "INTR : %lx\n", + qca->intr); seq_printf(s, "SPI max speed : %lu\n", (unsigned long)qca->spi_dev->max_speed_hz); diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 5f3c11fb3fa27..b697a9e6face6 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -48,6 +48,8 @@ #define MAX_DMA_BURST_LEN 5000 +#define SPI_INTR 0 + /* Modules parameters */ #define QCASPI_CLK_SPEED_MIN 1000000 #define QCASPI_CLK_SPEED_MAX 16000000 @@ -592,14 +594,14 @@ qcaspi_spi_thread(void *data) continue; } - if ((qca->intr_req == qca->intr_svc) && + if (!test_bit(SPI_INTR, &qca->intr) && !qca->txr.skb[qca->txr.head]) schedule(); set_current_state(TASK_RUNNING); - netdev_dbg(qca->net_dev, "have work to do. int: %d, tx_skb: %p\n", - qca->intr_req - qca->intr_svc, + netdev_dbg(qca->net_dev, "have work to do. int: %lu, tx_skb: %p\n", + qca->intr, qca->txr.skb[qca->txr.head]); qcaspi_qca7k_sync(qca, QCASPI_EVENT_UPDATE); @@ -613,8 +615,7 @@ qcaspi_spi_thread(void *data) msleep(QCASPI_QCA7K_REBOOT_TIME_MS); } - if (qca->intr_svc != qca->intr_req) { - qca->intr_svc = qca->intr_req; + if (test_and_clear_bit(SPI_INTR, &qca->intr)) { start_spi_intr_handling(qca, &intr_cause); if (intr_cause & SPI_INT_CPU_ON) { @@ -676,7 +677,7 @@ qcaspi_intr_handler(int irq, void *data) { struct qcaspi *qca = data; - qca->intr_req++; + set_bit(SPI_INTR, &qca->intr); if (qca->spi_thread) wake_up_process(qca->spi_thread); @@ -692,8 +693,7 @@ qcaspi_netdev_open(struct net_device *dev) if (!qca) return -EINVAL; - qca->intr_req = 1; - qca->intr_svc = 0; + set_bit(SPI_INTR, &qca->intr); qca->sync = QCASPI_SYNC_UNKNOWN; qcafrm_fsm_init_spi(&qca->frm_handle); diff --git a/drivers/net/ethernet/qualcomm/qca_spi.h b/drivers/net/ethernet/qualcomm/qca_spi.h index 3067356106f0b..58ad910068d4b 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.h +++ b/drivers/net/ethernet/qualcomm/qca_spi.h @@ -93,8 +93,7 @@ struct qcaspi { struct qcafrm_handle frm_handle; struct sk_buff *rx_skb; - unsigned int intr_req; - unsigned int intr_svc; + unsigned long intr; u16 reset_count; #ifdef CONFIG_DEBUG_FS