From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> commit f0260589b439e2637ad54a2b25f00a516ef28a57 upstream. The transferred length is set incorrectly for cancelled bulk transfer TDs in case the bulk transfer ring stops on the last transfer block with a 'Stop - Length Invalid' completion code. length essentially ends up being set to the requested length: urb->actual_length = urb->transfer_buffer_length Length for 'Stop - Length Invalid' cases should be the sum of all TRB transfer block lengths up to the one the ring stopped on, _excluding_ the one stopped on. Fix this by always summing up TRB lengths for 'Stop - Length Invalid' bulk cases. This issue was discovered by Alan Stern while debugging https://bugzilla.kernel.org/show_bug.cgi?id=218890, but does not solve that bug. Issue is older than 4.10 kernel but fix won't apply to those due to major reworks in that area. Tested-by: Pierre Tomon <pierretom+12@xxxxx> Cc: stable@xxxxxxxxxxxxxxx # v4.10+ Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20240611120610.3264502-2-mathias.nyman@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/host/xhci-ring.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2343,9 +2343,8 @@ static int process_bulk_intr_td(struct x goto finish_td; case COMP_STOPPED_LENGTH_INVALID: /* stopped on ep trb with invalid length, exclude it */ - ep_trb_len = 0; - remaining = 0; - break; + td->urb->actual_length = sum_trb_lengths(xhci, ep_ring, ep_trb); + goto finish_td; case COMP_USB_TRANSACTION_ERROR: if (xhci->quirks & XHCI_NO_SOFT_RETRY || (ep_ring->err_count++ > MAX_SOFT_RETRY) || Patches currently in stable-queue which might be from mathias.nyman@xxxxxxxxxxxxxxx are queue-5.4/xhci-apply-broken-streams-quirk-to-etron-ej188-xhci-host.patch queue-5.4/xhci-set-correct-transferred-length-for-cancelled-bulk-transfers.patch queue-5.4/xhci-apply-reset-resume-quirk-to-etron-ej188-xhci-host.patch
