Patch "wifi: ath11k: move power type check to ASSOC stage when connecting to 6 GHz AP" has been added to the 6.9-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    wifi: ath11k: move power type check to ASSOC stage when connecting to 6 GHz AP

to the 6.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     wifi-ath11k-move-power-type-check-to-assoc-stage-whe.patch
and it can be found in the queue-6.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 64482b6ba44828639a5ce1aef2b0260d1e3a50cd
Author: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
Date:   Tue May 21 11:08:11 2024 +0300

    wifi: ath11k: move power type check to ASSOC stage when connecting to 6 GHz AP
    
    [ Upstream commit 6e16782d6b4a724f9c9dcd49471219643593b60c ]
    
    With commit bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing")
    ath11k fails to connect to 6 GHz AP.
    
    This is because currently ath11k checks AP's power type in
    ath11k_mac_op_assign_vif_chanctx() which would be called in AUTH stage.
    However with above commit power type is not available until ASSOC stage.
    As a result power type check fails and therefore connection fails.
    
    Fix this by moving power type check to ASSOC stage, also move regulatory
    rules update there because it depends on power type.
    
    Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
    
    Fixes: bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing")
    Signed-off-by: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
    Acked-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
    Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
    Link: https://msgid.link/20240424064019.4847-1-quic_bqiang@xxxxxxxxxxx
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 2fca415322aec..790277f547bb4 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -7889,8 +7889,6 @@ ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 	struct ath11k_base *ab = ar->ab;
 	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
 	int ret;
-	struct cur_regulatory_info *reg_info;
-	enum ieee80211_ap_reg_power power_type;
 
 	mutex_lock(&ar->conf_mutex);
 
@@ -7901,17 +7899,6 @@ ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 	if (ath11k_wmi_supports_6ghz_cc_ext(ar) &&
 	    ctx->def.chan->band == NL80211_BAND_6GHZ &&
 	    arvif->vdev_type == WMI_VDEV_TYPE_STA) {
-		reg_info = &ab->reg_info_store[ar->pdev_idx];
-		power_type = vif->bss_conf.power_type;
-
-		ath11k_dbg(ab, ATH11K_DBG_MAC, "chanctx power type %d\n", power_type);
-
-		if (power_type == IEEE80211_REG_UNSET_AP) {
-			ret = -EINVAL;
-			goto out;
-		}
-
-		ath11k_reg_handle_chan_list(ab, reg_info, power_type);
 		arvif->chanctx = *ctx;
 		ath11k_mac_parse_tx_pwr_env(ar, vif, ctx);
 	}
@@ -9525,6 +9512,8 @@ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw,
 	struct ath11k *ar = hw->priv;
 	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
 	struct ath11k_sta *arsta = ath11k_sta_to_arsta(sta);
+	enum ieee80211_ap_reg_power power_type;
+	struct cur_regulatory_info *reg_info;
 	struct ath11k_peer *peer;
 	int ret = 0;
 
@@ -9604,6 +9593,29 @@ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw,
 				ath11k_warn(ar->ab, "Unable to authorize peer %pM vdev %d: %d\n",
 					    sta->addr, arvif->vdev_id, ret);
 		}
+
+		if (!ret &&
+		    ath11k_wmi_supports_6ghz_cc_ext(ar) &&
+		    arvif->vdev_type == WMI_VDEV_TYPE_STA &&
+		    arvif->chanctx.def.chan &&
+		    arvif->chanctx.def.chan->band == NL80211_BAND_6GHZ) {
+			reg_info = &ar->ab->reg_info_store[ar->pdev_idx];
+			power_type = vif->bss_conf.power_type;
+
+			if (power_type == IEEE80211_REG_UNSET_AP) {
+				ath11k_warn(ar->ab, "invalid power type %d\n",
+					    power_type);
+				ret = -EINVAL;
+			} else {
+				ret = ath11k_reg_handle_chan_list(ar->ab,
+								  reg_info,
+								  power_type);
+				if (ret)
+					ath11k_warn(ar->ab,
+						    "failed to handle chan list with power type %d\n",
+						    power_type);
+			}
+		}
 	} else if (old_state == IEEE80211_STA_AUTHORIZED &&
 		   new_state == IEEE80211_STA_ASSOC) {
 		spin_lock_bh(&ar->ab->base_lock);




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux