powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Puranjay Mohan <puranjay@xxxxxxxxxx>

commit b1e7cee96127468c2483cf10c2899c9b5cf79bf8 upstream.

The Linux Kernel Memory Model [1][2] requires RMW operations that have a
return value to be fully ordered.

BPF atomic operations with BPF_FETCH (including BPF_XCHG and
BPF_CMPXCHG) return a value back so they need to be JITed to fully
ordered operations. POWERPC currently emits relaxed operations for
these.

We can show this by running the following litmus-test:

  PPC SB+atomic_add+fetch

  {
      0:r0=x;  (* dst reg assuming offset is 0 *)
      0:r1=2;  (* src reg *)
      0:r2=1;
      0:r4=y;  (* P0 writes to this, P1 reads this *)
      0:r5=z;  (* P1 writes to this, P0 reads this *)
      0:r6=0;

      1:r2=1;
      1:r4=y;
      1:r5=z;
  }

  P0                      | P1            ;
  stw         r2, 0(r4)   | stw  r2,0(r5) ;
                          |               ;
  loop:lwarx  r3, r6, r0  |               ;
  mr          r8, r3      |               ;
  add         r3, r3, r1  | sync          ;
  stwcx.      r3, r6, r0  |               ;
  bne         loop        |               ;
  mr          r1, r8      |               ;
                          |               ;
  lwa         r7, 0(r5)   | lwa  r7,0(r4) ;

  ~exists(0:r7=0 /\ 1:r7=0)

  Witnesses
  Positive: 9 Negative: 3
  Condition ~exists (0:r7=0 /\ 1:r7=0)
  Observation SB+atomic_add+fetch Sometimes 3 9

This test shows that the older store in P0 is reordered with a newer
load to a different address. Although there is a RMW operation with
fetch between them. Adding a sync before and after RMW fixes the issue:

  Witnesses
  Positive: 9 Negative: 0
  Condition ~exists (0:r7=0 /\ 1:r7=0)
  Observation SB+atomic_add+fetch Never 0 9

[1] https://www.kernel.org/doc/Documentation/memory-barriers.txt
[2] https://www.kernel.org/doc/Documentation/atomic_t.txt

Fixes: aea7ef8a82c0 ("powerpc/bpf/32: add support for BPF_ATOMIC bitwise operations")
Fixes: 2d9206b22743 ("powerpc/bpf/32: Add instructions for atomic_[cmp]xchg")
Fixes: dbe6e2456fb0 ("powerpc/bpf/64: add support for atomic fetch operations")
Fixes: 1e82dfaa7819 ("powerpc/bpf/64: Add instructions for atomic_[cmp]xchg")
Cc: stable@xxxxxxxxxxxxxxx # v6.0+
Signed-off-by: Puranjay Mohan <puranjay@xxxxxxxxxx>
Reviewed-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
Reviewed-by: Naveen N Rao <naveen@xxxxxxxxxx>
Acked-by: Paul E. McKenney <paulmck@xxxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Link: https://msgid.link/20240513100248.110535-1-puranjay@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 arch/powerpc/net/bpf_jit_comp32.c |   12 ++++++++++++
 arch/powerpc/net/bpf_jit_comp64.c |   12 ++++++++++++
 2 files changed, 24 insertions(+)

--- a/arch/powerpc/net/bpf_jit_comp32.c
+++ b/arch/powerpc/net/bpf_jit_comp32.c
@@ -814,6 +814,15 @@ int bpf_jit_build_body(struct bpf_prog *
 
 			/* Get offset into TMP_REG */
 			EMIT(PPC_RAW_LI(tmp_reg, off));
+			/*
+			 * Enforce full ordering for operations with BPF_FETCH by emitting a 'sync'
+			 * before and after the operation.
+			 *
+			 * This is a requirement in the Linux Kernel Memory Model.
+			 * See __cmpxchg_u32() in asm/cmpxchg.h as an example.
+			 */
+			if ((imm & BPF_FETCH) && IS_ENABLED(CONFIG_SMP))
+				EMIT(PPC_RAW_SYNC());
 			tmp_idx = ctx->idx * 4;
 			/* load value from memory into r0 */
 			EMIT(PPC_RAW_LWARX(_R0, tmp_reg, dst_reg, 0));
@@ -867,6 +876,9 @@ int bpf_jit_build_body(struct bpf_prog *
 
 			/* For the BPF_FETCH variant, get old data into src_reg */
 			if (imm & BPF_FETCH) {
+				/* Emit 'sync' to enforce full ordering */
+				if (IS_ENABLED(CONFIG_SMP))
+					EMIT(PPC_RAW_SYNC());
 				EMIT(PPC_RAW_MR(ret_reg, ax_reg));
 				if (!fp->aux->verifier_zext)
 					EMIT(PPC_RAW_LI(ret_reg - 1, 0)); /* higher 32-bit */
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -784,6 +784,15 @@ emit_clear:
 
 			/* Get offset into TMP_REG_1 */
 			EMIT(PPC_RAW_LI(tmp1_reg, off));
+			/*
+			 * Enforce full ordering for operations with BPF_FETCH by emitting a 'sync'
+			 * before and after the operation.
+			 *
+			 * This is a requirement in the Linux Kernel Memory Model.
+			 * See __cmpxchg_u64() in asm/cmpxchg.h as an example.
+			 */
+			if ((imm & BPF_FETCH) && IS_ENABLED(CONFIG_SMP))
+				EMIT(PPC_RAW_SYNC());
 			tmp_idx = ctx->idx * 4;
 			/* load value from memory into TMP_REG_2 */
 			if (size == BPF_DW)
@@ -846,6 +855,9 @@ emit_clear:
 			PPC_BCC_SHORT(COND_NE, tmp_idx);
 
 			if (imm & BPF_FETCH) {
+				/* Emit 'sync' to enforce full ordering */
+				if (IS_ENABLED(CONFIG_SMP))
+					EMIT(PPC_RAW_SYNC());
 				EMIT(PPC_RAW_MR(ret_reg, _R0));
 				/*
 				 * Skip unnecessary zero-extension for 32-bit cmpxchg.


Patches currently in stable-queue which might be from puranjay@xxxxxxxxxx are

queue-6.1/powerpc-bpf-enforce-full-ordering-for-atomic-operations-with-bpf_fetch.patch




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux