From: Hans de Goede <hdegoede@xxxxxxxxxx>
commit 431946c0f640c93421439a6c928efb3152c035a4 upstream.
The card-detect GPIO for the microSD slot on Asus T100TA / T100TAM models
stopped working under Linux after commit 6fd03f024828 ("gpiolib: acpi:
support bias pull disable").
The GPIO in question is connected to a mechanical switch in the slot
which shorts the pin to GND when a card is inserted.
The GPIO pin correctly gets configured with a 20K pull-up by the BIOS,
but there is a bug in the DSDT where the GpioInt for the card-detect is
configured with a PullNone setting:
GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x2710,
"\\_SB.GPO0", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0026
}
Linux now actually honors the PullNone setting and disables the 20K pull-up
configured by the BIOS.
Add a new DMI_QUIRK_SD_CD_ENABLE_PULL_UP quirk which when set calls
mmc_gpiod_set_cd_config() to re-enable the pull-up and set this for
the Asus T100TA models to fix this.
Fixes: 6fd03f024828 ("gpiolib: acpi: support bias pull disable")
Reviewed-by: Andy Shevchenko <andy@xxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20240410191639.526324-7-hdegoede@xxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-acpi.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -10,6 +10,7 @@
#include <linux/export.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/io.h>
@@ -81,6 +82,7 @@ enum {
DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP = BIT(0),
DMI_QUIRK_SD_NO_WRITE_PROTECT = BIT(1),
DMI_QUIRK_SD_CD_ACTIVE_HIGH = BIT(2),
+ DMI_QUIRK_SD_CD_ENABLE_PULL_UP = BIT(3),
};
static inline void *sdhci_acpi_priv(struct sdhci_acpi_host *c)
@@ -735,6 +737,14 @@ static const struct dmi_system_id sdhci_
.driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT,
},
{
+ /* Asus T100TA, needs pull-up for cd but DSDT GpioInt has NoPull set */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+ },
+ .driver_data = (void *)DMI_QUIRK_SD_CD_ENABLE_PULL_UP,
+ },
+ {
/*
* The Lenovo Miix 320-10ICR has a bug in the _PS0 method of
* the SHC1 ACPI device, this bug causes it to reprogram the
@@ -908,6 +918,9 @@ static int sdhci_acpi_probe(struct platf
goto err_free;
dev_warn(dev, "failed to setup card detect gpio\n");
c->use_runtime_pm = false;
+ } else if (quirks & DMI_QUIRK_SD_CD_ENABLE_PULL_UP) {
+ mmc_gpiod_set_cd_config(host->mmc,
+ PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 20000));
}
if (quirks & DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP)
Patches currently in stable-queue which might be from hdegoede@xxxxxxxxxx are
queue-6.9/media-ov2740-fix-link_freq-and-pixel_rate-control-value-reporting.patch
queue-6.9/mmc-sdhci-acpi-add-quirk-to-enable-pull-up-on-the-card-detect-gpio-on-asus-t100ta.patch
queue-6.9/mmc-core-add-mmc_gpiod_set_cd_config-function.patch
queue-6.9/mmc-sdhci-acpi-sort-dmi-quirks-alphabetically.patch
queue-6.9/mmc-sdhci-add-support-for-tuning-error-interrupts.patch
queue-6.9/mmc-sdhci-acpi-fix-lenovo-yoga-tablet-2-pro-1380-sdcard-slot-not-working.patch
queue-6.9/mmc-sdhci-acpi-disable-write-protect-detection-on-toshiba-wt10-a.patch
