This is a note to let you know that I've just added the patch titled
net: usb: smsc95xx: fix changing LED_SEL bit value updated from EEPROM
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-usb-smsc95xx-fix-changing-led_sel-bit-value-upda.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 15d5b40525ae26101e8afea161a84247c4ec48ff
Author: Parthiban Veerasooran <Parthiban.Veerasooran@xxxxxxxxxxxxx>
Date: Thu May 23 14:23:14 2024 +0530
net: usb: smsc95xx: fix changing LED_SEL bit value updated from EEPROM
[ Upstream commit 52a2f0608366a629d43dacd3191039c95fef74ba ]
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.
While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.
Fixes: f293501c61c5 ("smsc95xx: configure LED outputs")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@xxxxxxxxxxxxx>
Reviewed-by: Simon Horman <horms@xxxxxxxxxx>
Reviewed-by: Woojung Huh <woojung.huh@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@xxxxxxxxxxxxx
Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 2778ad6726f03..30e5f6910e6fd 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -845,7 +845,7 @@ static int smsc95xx_start_rx_path(struct usbnet *dev, int in_pm)
static int smsc95xx_reset(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = dev->driver_priv;
- u32 read_buf, write_buf, burst_cap;
+ u32 read_buf, burst_cap;
int ret = 0, timeout;
netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
@@ -987,10 +987,13 @@ static int smsc95xx_reset(struct usbnet *dev)
return ret;
netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf);
+ ret = smsc95xx_read_reg(dev, LED_GPIO_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
/* Configure GPIO pins as LED outputs */
- write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
- LED_GPIO_CFG_FDX_LED;
- ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
+ read_buf |= LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
+ LED_GPIO_CFG_FDX_LED;
+ ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, read_buf);
if (ret < 0)
return ret;
