Patch "media: ov2680: Do not fail if data-lanes property is absent" has been added to the 6.8-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    media: ov2680: Do not fail if data-lanes property is absent

to the 6.8-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     media-ov2680-do-not-fail-if-data-lanes-property-is-a.patch
and it can be found in the queue-6.8 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 367ce147abd1df830c8107511b897032c3b287d1
Author: Fabio Estevam <festevam@xxxxxxx>
Date:   Sun Apr 14 18:09:06 2024 -0300

    media: ov2680: Do not fail if data-lanes property is absent
    
    [ Upstream commit 24034af644fc01126bec9850346a06ef1450181f ]
    
    Since commit 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint
    property verification") the ov2680 driver no longer probes when the
    'data-lanes' property is absent.
    
    The OV2680 sensor has only one data lane, so there is no need for
    describing it the devicetree.
    
    Remove the unnecessary data-lanes property check.
    
    Suggested-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
    Fixes: 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property verification")
    Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
    Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
    Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
    Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index a857763c7984c..4577a8977c85a 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -1116,13 +1116,6 @@ static int ov2680_parse_dt(struct ov2680_dev *sensor)
 	sensor->pixel_rate = sensor->link_freq[0] * 2;
 	do_div(sensor->pixel_rate, 10);
 
-	/* Verify bus cfg */
-	if (bus_cfg.bus.mipi_csi2.num_data_lanes != 1) {
-		ret = dev_err_probe(dev, -EINVAL,
-				    "only a 1-lane CSI2 config is supported");
-		goto out_free_bus_cfg;
-	}
-
 	if (!bus_cfg.nr_of_link_frequencies) {
 		dev_warn(dev, "Consider passing 'link-frequencies' in DT\n");
 		goto skip_link_freq_validation;




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux