This is a note to let you know that I've just added the patch titled
drm/msm/dpu: Allow configuring multiple active DSC blocks
to the 6.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-msm-dpu-allow-configuring-multiple-active-dsc-bl.patch
and it can be found in the queue-6.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 34af238370dbf2754832003c9b868e24552c9c3a
Author: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Date: Wed Apr 17 01:57:44 2024 +0200
drm/msm/dpu: Allow configuring multiple active DSC blocks
[ Upstream commit ca97fa419dfe62a384fdea8b33553c4d6afe034e ]
Just like the active interface and writeback block in ctl_intf_cfg_v1(),
and later the rest of the blocks in followup active-CTL fixes or
reworks, multiple calls to this function should enable additional DSC
blocks instead of overwriting the blocks that are enabled.
This pattern is observed in an active-CTL scenario since DPU 5.0.0 where
for example bonded-DSI uses a single CTL to drive multiple INTFs, and
each encoder calls this function individually with the INTF (hence the
pre-existing update instead of overwrite of this bitmask) and DSC blocks
it wishes to be enabled, and expects them to be OR'd into the bitmask.
The reverse already exists in reset_intf_cfg_v1() where only specified
DSC blocks are removed out of the CTL_DSC_ACTIVE bitmask (same for all
other blocks and ACTIVE bitmasks), leaving the rest enabled.
Fixes: 77f6da90487c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Patchwork: https://patchwork.freedesktop.org/patch/589902/
Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-4-78ae3ee9a697@xxxxxxxxxxxxxx
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index a06f69d0b257d..2e50049f2f850 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -545,6 +545,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
{
struct dpu_hw_blk_reg_map *c = &ctx->hw;
u32 intf_active = 0;
+ u32 dsc_active = 0;
u32 wb_active = 0;
u32 mode_sel = 0;
@@ -560,6 +561,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
intf_active = DPU_REG_READ(c, CTL_INTF_ACTIVE);
wb_active = DPU_REG_READ(c, CTL_WB_ACTIVE);
+ dsc_active = DPU_REG_READ(c, CTL_DSC_ACTIVE);
if (cfg->intf)
intf_active |= BIT(cfg->intf - INTF_0);
@@ -567,17 +569,18 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
if (cfg->wb)
wb_active |= BIT(cfg->wb - WB_0);
+ if (cfg->dsc)
+ dsc_active |= cfg->dsc;
+
DPU_REG_WRITE(c, CTL_TOP, mode_sel);
DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active);
DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
+ DPU_REG_WRITE(c, CTL_DSC_ACTIVE, dsc_active);
if (cfg->merge_3d)
DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
BIT(cfg->merge_3d - MERGE_3D_0));
- if (cfg->dsc)
- DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
-
if (cfg->cdm)
DPU_REG_WRITE(c, CTL_CDM_ACTIVE, cfg->cdm);
}
