Patch "riscv: dts: starfive: visionfive 2: Remove non-existing TDM hardware" has been added to the 6.8-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    riscv: dts: starfive: visionfive 2: Remove non-existing TDM hardware

to the 6.8-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     riscv-dts-starfive-visionfive-2-remove-non-existing-.patch
and it can be found in the queue-6.8 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 20460ecca97dac3dd1fa5ebc72df6c9aab7f017e
Author: Hannah Peuckmann <hannah.peuckmann@xxxxxxxxxxxxx>
Date:   Mon Apr 15 14:50:32 2024 +0200

    riscv: dts: starfive: visionfive 2: Remove non-existing TDM hardware
    
    [ Upstream commit dcde4e97b122ac318aaa71e8bcd2857dc28a0d12 ]
    
    This partially reverts
    commit e7c304c0346d ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
    
    This added device tree nodes for TDM hardware that is not actually on the
    VisionFive 2 board, but connected on the 40pin header. Many different extension
    boards could be added on those pins, so this should be handled by overlays
    instead.
    This also conflicts with the I2S node which also attempts to grab GPIO 44:
    
      starfive-jh7110-sys-pinctrl 13040000.pinctrl: pin GPIO44 already requested by 10090000.tdm; cannot claim for 120c0000.i2s
    
    Fixes: e7c304c0346d ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
    Signed-off-by: Hannah Peuckmann <hannah.peuckmann@xxxxxxxxxxxxx>
    Reviewed-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
    Tested-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
    Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index b89e9791efa72..30aa170bb76c7 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -551,40 +551,6 @@ GPOEN_ENABLE,
 		};
 	};
 
-	tdm_pins: tdm-0 {
-		tx-pins {
-			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-pull-up;
-			drive-strength = <2>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
-		rx-pins {
-			pinmux = <GPIOMUX(61, GPOUT_HIGH,
-					      GPOEN_DISABLE,
-					      GPI_SYS_TDM_RXD)>;
-			input-enable;
-		};
-
-		sync-pins {
-			pinmux = <GPIOMUX(63, GPOUT_HIGH,
-					      GPOEN_DISABLE,
-					      GPI_SYS_TDM_SYNC)>;
-			input-enable;
-		};
-
-		pcmclk-pins {
-			pinmux = <GPIOMUX(38, GPOUT_HIGH,
-					      GPOEN_DISABLE,
-					      GPI_SYS_TDM_CLK)>;
-			input-enable;
-		};
-	};
-
 	uart0_pins: uart0-0 {
 		tx-pins {
 			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
@@ -610,12 +576,6 @@ GPOEN_DISABLE,
 	};
 };
 
-&tdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tdm_pins>;
-	status = "okay";
-};
-
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux