This is a note to let you know that I've just added the patch titled
net: dsa: mv88e6xxx: Add support for model-specific pre- and post-reset handlers
to the 5.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-dsa-mv88e6xxx-add-support-for-model-specific-pre.patch
and it can be found in the queue-5.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit f0f7c88f81803c059d0d03b1ce8c15170fc7ca6e
Author: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
Date: Tue Apr 23 09:47:48 2024 +0200
net: dsa: mv88e6xxx: Add support for model-specific pre- and post-reset handlers
[ Upstream commit 0fdd27b9d6d7c60bd319d3497ad797934bab13cb ]
Instead of calling mv88e6xxx_g2_eeprom_wait() directly from
mv88e6xxx_hardware_reset(), add configurable pre- and post-reset hard
reset handlers. Initially, the handlers are set to
mv88e6xxx_g2_eeprom_wait() for all families that have get/set_eeprom()
to match the existing behavior. No functional change intended (except
for additional error messages on failure).
Fixes: 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent")
Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 3fc120802883a..7484ba387d771 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2585,6 +2585,7 @@ static int mv88e6xxx_software_reset(struct mv88e6xxx_chip *chip)
static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip)
{
struct gpio_desc *gpiod = chip->reset;
+ int err;
/* If there is a GPIO connected to the reset pin, toggle it */
if (gpiod) {
@@ -2593,17 +2594,26 @@ static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip)
* mid-byte, causing the first EEPROM read after the reset
* from the wrong location resulting in the switch booting
* to wrong mode and inoperable.
+ * For this reason, switch families with EEPROM support
+ * generally wait for EEPROM loads to complete as their pre-
+ * and post-reset handlers.
*/
- if (chip->info->ops->get_eeprom)
- mv88e6xxx_g2_eeprom_wait(chip);
+ if (chip->info->ops->hardware_reset_pre) {
+ err = chip->info->ops->hardware_reset_pre(chip);
+ if (err)
+ dev_err(chip->dev, "pre-reset error: %d\n", err);
+ }
gpiod_set_value_cansleep(gpiod, 1);
usleep_range(10000, 20000);
gpiod_set_value_cansleep(gpiod, 0);
usleep_range(10000, 20000);
- if (chip->info->ops->get_eeprom)
- mv88e6xxx_g2_eeprom_wait(chip);
+ if (chip->info->ops->hardware_reset_post) {
+ err = chip->info->ops->hardware_reset_post(chip);
+ if (err)
+ dev_err(chip->dev, "post-reset error: %d\n", err);
+ }
}
}
@@ -3824,6 +3834,8 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4006,6 +4018,8 @@ static const struct mv88e6xxx_ops mv88e6172_ops = {
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6352_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4103,6 +4117,8 @@ static const struct mv88e6xxx_ops mv88e6176_ops = {
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6352_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4201,6 +4217,8 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4262,6 +4280,8 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4321,6 +4341,8 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4383,6 +4405,8 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6352_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4438,6 +4462,8 @@ static const struct mv88e6xxx_ops mv88e6250_ops = {
.watchdog_ops = &mv88e6250_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6250_g1_reset,
.vtu_getnext = mv88e6185_g1_vtu_getnext,
.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -4482,6 +4508,8 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4543,6 +4571,8 @@ static const struct mv88e6xxx_ops mv88e6320_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6185_g1_vtu_getnext,
.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -4586,6 +4616,8 @@ static const struct mv88e6xxx_ops mv88e6321_ops = {
.set_egress_port = mv88e6095_g1_set_egress_port,
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6185_g1_vtu_getnext,
.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -4634,6 +4666,8 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4784,6 +4818,8 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6352_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4848,6 +4884,8 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4913,6 +4951,8 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4981,6 +5021,8 @@ static const struct mv88e6xxx_ops mv88e6393x_ops = {
.watchdog_ops = &mv88e6393x_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6393x_port_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 6b7307edaf172..6b86e7645be60 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -434,6 +434,12 @@ struct mv88e6xxx_ops {
int (*ppu_enable)(struct mv88e6xxx_chip *chip);
int (*ppu_disable)(struct mv88e6xxx_chip *chip);
+ /* Additional handlers to run before and after hard reset, to make sure
+ * that the switch and EEPROM are in a good state.
+ */
+ int (*hardware_reset_pre)(struct mv88e6xxx_chip *chip);
+ int (*hardware_reset_post)(struct mv88e6xxx_chip *chip);
+
/* Switch Software Reset */
int (*reset)(struct mv88e6xxx_chip *chip);
