This is a note to let you know that I've just added the patch titled
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
scsi-ufs-ufs-qcom-clear-qunipro_g4_sel-for-hw-versio.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 1eb9c6b3010a6a836605fcf0b10c03be7a768bc4
Author: Abel Vesa <abel.vesa@xxxxxxxxxx>
Date: Thu Jan 19 17:14:05 2023 +0200
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
[ Upstream commit 9c02aa24bf404a39ec509d9f50539056b9b128f7 ]
On SM8550, depending on the Qunipro, we can run with G5 or G4. For now,
when the major version is 5 or above, we go with G5. Therefore, we need to
specifically tell UFS HC that.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Stable-dep-of: 823150ecf04f ("scsi: ufs: qcom: Perform read back after writing unipro mode")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index a5d981d3dd6be..ce18c43937a22 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -226,6 +226,10 @@ static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
ufshcd_rmwl(host->hba, QUNIPRO_SEL,
ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0,
REG_UFS_CFG1);
+
+ if (host->hw_ver.major == 0x05)
+ ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0);
+
/* make sure above configuration is applied before we return */
mb();
}
@@ -498,9 +502,9 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
mb();
}
- if (update_link_startup_timer) {
+ if (update_link_startup_timer && host->hw_ver.major != 0x5) {
ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
- REG_UFS_PA_LINK_STARTUP_TIMER);
+ REG_UFS_CFG0);
/*
* make sure that this configuration is applied before
* we return
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 112e53efafe2b..24367cee0b3ff 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -38,7 +38,8 @@ enum {
REG_UFS_PA_ERR_CODE = 0xCC,
/* On older UFS revisions, this register is called "RETRY_TIMER_REG" */
REG_UFS_PARAM0 = 0xD0,
- REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8,
+ /* On older UFS revisions, this register is called "REG_UFS_PA_LINK_STARTUP_TIMER" */
+ REG_UFS_CFG0 = 0xD8,
REG_UFS_CFG1 = 0xDC,
REG_UFS_CFG2 = 0xE0,
REG_UFS_HW_VERSION = 0xE4,
@@ -76,6 +77,9 @@ enum {
#define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x) (0x000 + x)
#define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x) (0x400 + x)
+/* bit definitions for REG_UFS_CFG0 register */
+#define QUNIPRO_G4_SEL BIT(5)
+
/* bit definitions for REG_UFS_CFG1 register */
#define QUNIPRO_SEL 0x1
#define UTP_DBG_RAMS_EN 0x20000
