This is a note to let you know that I've just added the patch titled
ASoC: dt-bindings: rt5645: add cbj sleeve gpio property
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
asoc-dt-bindings-rt5645-add-cbj-sleeve-gpio-property.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 0cd751725f376f17710b9415f43fdcf24a2ec4ac
Author: Derek Fang <derek.fang@xxxxxxxxxxx>
Date: Mon Apr 8 17:10:57 2024 +0800
ASoC: dt-bindings: rt5645: add cbj sleeve gpio property
[ Upstream commit 306b38e3fa727d22454a148a364123709e356600 ]
Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.
Signed-off-by: Derek Fang <derek.fang@xxxxxxxxxxx>
Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt
index 41a62fd2ae1ff..c1fa379f5f3ea 100644
--- a/Documentation/devicetree/bindings/sound/rt5645.txt
+++ b/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@ Optional properties:
a GPIO spec for the external headphone detect pin. If jd-mode = 0,
we will get the JD status by getting the value of hp-detect-gpios.
+- cbj-sleeve-gpios:
+ a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+ contacts to the ground or floating. It could avoid some electric noise from the
+ active speaker jacks.
+
- realtek,in2-differential
Boolean. Indicate MIC2 input are differential, rather than single-ended.
@@ -68,6 +73,7 @@ codec: rt5650@1a {
compatible = "realtek,rt5650";
reg = <0x1a>;
hp-detect-gpios = <&gpio 19 0>;
+ cbj-sleeve-gpios = <&gpio 20 0>;
interrupt-parent = <&gpio>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
realtek,dmic-en = "true";
