This is a note to let you know that I've just added the patch titled
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
to the 5.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
pinctrl-pinctrl-aspeed-g6-fix-register-offset-for-pi.patch
and it can be found in the queue-5.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 7eccbbd09163a02dcaad5d4b44351070e7fb08a9
Author: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
Date: Wed Mar 13 17:28:09 2024 +0800
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
[ Upstream commit c10cd03d69403fa0f00be8631bd4cb4690440ebd ]
The register offset to disable the internal pull-down of GPIOR~T is 0x630
instead of 0x620, as specified in the Ast2600 datasheet v15
The datasheet can download from the official Aspeed website.
Fixes: 15711ba6ff19 ("pinctrl: aspeed-g6: Add AST2600 pinconf support")
Reported-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
Reviewed-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
Reviewed-by: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
Message-ID: <20240313092809.2596644-1-billy_tsai@xxxxxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index 54064714d73fb..b223583dfb73c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -43,7 +43,7 @@
#define SCU614 0x614 /* Disable GPIO Internal Pull-Down #1 */
#define SCU618 0x618 /* Disable GPIO Internal Pull-Down #2 */
#define SCU61C 0x61c /* Disable GPIO Internal Pull-Down #3 */
-#define SCU620 0x620 /* Disable GPIO Internal Pull-Down #4 */
+#define SCU630 0x630 /* Disable GPIO Internal Pull-Down #4 */
#define SCU634 0x634 /* Disable GPIO Internal Pull-Down #5 */
#define SCU638 0x638 /* Disable GPIO Internal Pull-Down #6 */
#define SCU690 0x690 /* Multi-function Pin Control #24 */
@@ -2487,38 +2487,38 @@ static struct aspeed_pin_config aspeed_g6_configs[] = {
ASPEED_PULL_DOWN_PINCONF(D14, SCU61C, 0),
/* GPIOS7 */
- ASPEED_PULL_DOWN_PINCONF(T24, SCU620, 23),
+ ASPEED_PULL_DOWN_PINCONF(T24, SCU630, 23),
/* GPIOS6 */
- ASPEED_PULL_DOWN_PINCONF(P23, SCU620, 22),
+ ASPEED_PULL_DOWN_PINCONF(P23, SCU630, 22),
/* GPIOS5 */
- ASPEED_PULL_DOWN_PINCONF(P24, SCU620, 21),
+ ASPEED_PULL_DOWN_PINCONF(P24, SCU630, 21),
/* GPIOS4 */
- ASPEED_PULL_DOWN_PINCONF(R26, SCU620, 20),
+ ASPEED_PULL_DOWN_PINCONF(R26, SCU630, 20),
/* GPIOS3*/
- ASPEED_PULL_DOWN_PINCONF(R24, SCU620, 19),
+ ASPEED_PULL_DOWN_PINCONF(R24, SCU630, 19),
/* GPIOS2 */
- ASPEED_PULL_DOWN_PINCONF(T26, SCU620, 18),
+ ASPEED_PULL_DOWN_PINCONF(T26, SCU630, 18),
/* GPIOS1 */
- ASPEED_PULL_DOWN_PINCONF(T25, SCU620, 17),
+ ASPEED_PULL_DOWN_PINCONF(T25, SCU630, 17),
/* GPIOS0 */
- ASPEED_PULL_DOWN_PINCONF(R23, SCU620, 16),
+ ASPEED_PULL_DOWN_PINCONF(R23, SCU630, 16),
/* GPIOR7 */
- ASPEED_PULL_DOWN_PINCONF(U26, SCU620, 15),
+ ASPEED_PULL_DOWN_PINCONF(U26, SCU630, 15),
/* GPIOR6 */
- ASPEED_PULL_DOWN_PINCONF(W26, SCU620, 14),
+ ASPEED_PULL_DOWN_PINCONF(W26, SCU630, 14),
/* GPIOR5 */
- ASPEED_PULL_DOWN_PINCONF(T23, SCU620, 13),
+ ASPEED_PULL_DOWN_PINCONF(T23, SCU630, 13),
/* GPIOR4 */
- ASPEED_PULL_DOWN_PINCONF(U25, SCU620, 12),
+ ASPEED_PULL_DOWN_PINCONF(U25, SCU630, 12),
/* GPIOR3*/
- ASPEED_PULL_DOWN_PINCONF(V26, SCU620, 11),
+ ASPEED_PULL_DOWN_PINCONF(V26, SCU630, 11),
/* GPIOR2 */
- ASPEED_PULL_DOWN_PINCONF(V24, SCU620, 10),
+ ASPEED_PULL_DOWN_PINCONF(V24, SCU630, 10),
/* GPIOR1 */
- ASPEED_PULL_DOWN_PINCONF(U24, SCU620, 9),
+ ASPEED_PULL_DOWN_PINCONF(U24, SCU630, 9),
/* GPIOR0 */
- ASPEED_PULL_DOWN_PINCONF(V25, SCU620, 8),
+ ASPEED_PULL_DOWN_PINCONF(V25, SCU630, 8),
/* GPIOX7 */
ASPEED_PULL_DOWN_PINCONF(AB10, SCU634, 31),
