This is a note to let you know that I've just added the patch titled
arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-rockchip-set-phy-address-of-mt7531-switch-.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 678da6f7f2f267c81ff74875ec53fa2c7c9bf902
Author: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
Date: Thu Mar 14 15:24:35 2024 +0300
arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f
[ Upstream commit a2ac2a1b02590a22a236c43c455f421cdede45f5 ]
The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
findings that support this. There's no bootstrapping option to change the
PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
address of the switch. So the reg property on the device tree is currently
ignored by the Linux driver.
Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
has this switch.
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
Fixes: c1804463e5c6 ("arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board")
Link: https://lore.kernel.org/r/20240314-for-rockchip-mt7531-phy-address-v1-1-743b5873358f@xxxxxxxxxx
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 26d7fda275edb..7952a14314360 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -521,9 +521,9 @@ &mdio0 {
#address-cells = <1>;
#size-cells = <0>;
- switch@0 {
+ switch@1f {
compatible = "mediatek,mt7531";
- reg = <0>;
+ reg = <0x1f>;
ports {
#address-cells = <1>;
