This is a note to let you know that I've just added the patch titled
net: dsa: mv88e6xx: fix supported_interfaces setup in mv88e6250_phylink_get_caps()
to the 6.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-dsa-mv88e6xx-fix-supported_interfaces-setup-in-m.patch
and it can be found in the queue-6.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 5dbef2f31f2c20e44d8c679f4fcba1dbb410c047
Author: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
Date: Wed Apr 17 12:37:37 2024 +0200
net: dsa: mv88e6xx: fix supported_interfaces setup in mv88e6250_phylink_get_caps()
[ Upstream commit a4e3899065ffa87d49dc20e8c17501edbc189692 ]
With the recent PHYLINK changes requiring supported_interfaces to be set,
MV88E6250 family switches like the 88E6020 fail to probe - cmode is
never initialized on these devices, so mv88e6250_phylink_get_caps() does
not set any supported_interfaces flags.
Instead of a cmode, on 88E6250 we have a read-only port mode value that
encodes similar information. There is no reason to bother mapping port
mode to the cmodes of other switch models; instead we introduce a
mv88e6250_setup_supported_interfaces() that is called directly from
mv88e6250_phylink_get_caps().
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20240417103737.166651-1-matthias.schiffer@xxxxxxxxxxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 7de8a9c9e4576..32416d8802ca4 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -566,13 +566,61 @@ static void mv88e6xxx_translate_cmode(u8 cmode, unsigned long *supported)
phy_interface_set_rgmii(supported);
}
-static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+static void
+mv88e6250_setup_supported_interfaces(struct mv88e6xxx_chip *chip, int port,
+ struct phylink_config *config)
{
unsigned long *supported = config->supported_interfaces;
+ int err;
+ u16 reg;
- /* Translate the default cmode */
- mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
+ err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®);
+ if (err) {
+ dev_err(chip->dev, "p%d: failed to read port status\n", port);
+ return;
+ }
+
+ switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) {
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY:
+ __set_bit(PHY_INTERFACE_MODE_REVMII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_HALF:
+ case MV88E6250_PORT_STS_PORTMODE_MII_FULL:
+ __set_bit(PHY_INTERFACE_MODE_MII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY:
+ __set_bit(PHY_INTERFACE_MODE_REVRMII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL:
+ __set_bit(PHY_INTERFACE_MODE_RMII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII:
+ __set_bit(PHY_INTERFACE_MODE_RGMII, supported);
+ break;
+
+ default:
+ dev_err(chip->dev,
+ "p%d: invalid port mode in status register: %04x\n",
+ port, reg);
+ }
+}
+
+static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
+ struct phylink_config *config)
+{
+ if (!mv88e6xxx_phy_is_internal(chip, port))
+ mv88e6250_setup_supported_interfaces(chip, port, config);
config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100;
}
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 86deeb347cbc1..ddadeb9bfdaee 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -25,10 +25,25 @@
#define MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF 0x0900
#define MV88E6250_PORT_STS_PORTMODE_PHY_10_FULL 0x0a00
#define MV88E6250_PORT_STS_PORTMODE_PHY_100_FULL 0x0b00
-#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF 0x0c00
-#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF 0x0d00
-#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL 0x0e00
-#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL 0x0f00
+/* - Modes with PHY suffix use output instead of input clock
+ * - Modes without RMII or RGMII use MII
+ * - Modes without speed do not have a fixed speed specified in the manual
+ * ("DC to x MHz" - variable clock support?)
+ */
+#define MV88E6250_PORT_STS_PORTMODE_MII_DISABLED 0x0000
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII 0x0100
+#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY 0x0200
+#define MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY 0x0400
+#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL 0x0600
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL 0x0700
+#define MV88E6250_PORT_STS_PORTMODE_MII_HALF 0x0800
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY 0x0900
+#define MV88E6250_PORT_STS_PORTMODE_MII_FULL 0x0a00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY 0x0b00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY 0x0c00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY 0x0d00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY 0x0e00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY 0x0f00
#define MV88E6XXX_PORT_STS_LINK 0x0800
#define MV88E6XXX_PORT_STS_DUPLEX 0x0400
#define MV88E6XXX_PORT_STS_SPEED_MASK 0x0300
