This is a note to let you know that I've just added the patch titled
thunderbolt: Make tb_switch_reset() support Thunderbolt 2, 3 and USB4 routers
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
thunderbolt-make-tb_switch_reset-support-thunderbolt-2-3-and-usb4-routers.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From ec8162b3f0683ae08a21f20517cf49272b07ee0b Mon Sep 17 00:00:00 2001
From: Sanath S <Sanath.S@xxxxxxx>
Date: Sat, 13 Jan 2024 11:47:26 +0200
Subject: thunderbolt: Make tb_switch_reset() support Thunderbolt 2, 3 and USB4 routers
From: Sanath S <Sanath.S@xxxxxxx>
commit ec8162b3f0683ae08a21f20517cf49272b07ee0b upstream.
Currently tb_switch_reset() only did something for Thunderbolt 1
devices. Expand this to support all generations, including USB4, and
both host and device routers.
Signed-off-by: Sanath S <Sanath.S@xxxxxxx>
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Cc: Mario Limonciello <mario.limonciello@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/thunderbolt/switch.c | 123 +++++++++++++++++++++++++++++++++++++-----
drivers/thunderbolt/tb_regs.h | 2
2 files changed, 111 insertions(+), 14 deletions(-)
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -1492,29 +1492,124 @@ static void tb_dump_switch(const struct
regs->__unknown1, regs->__unknown4);
}
+static int tb_switch_reset_host(struct tb_switch *sw)
+{
+ if (sw->generation > 1) {
+ struct tb_port *port;
+
+ tb_switch_for_each_port(sw, port) {
+ int i, ret;
+
+ /*
+ * For lane adapters we issue downstream port
+ * reset and clear up path config spaces.
+ *
+ * For protocol adapters we disable the path and
+ * clear path config space one by one (from 8 to
+ * Max Input HopID of the adapter).
+ */
+ if (tb_port_is_null(port) && !tb_is_upstream_port(port)) {
+ ret = tb_port_reset(port);
+ if (ret)
+ return ret;
+ } else if (tb_port_is_usb3_down(port) ||
+ tb_port_is_usb3_up(port)) {
+ tb_usb3_port_enable(port, false);
+ } else if (tb_port_is_dpin(port) ||
+ tb_port_is_dpout(port)) {
+ tb_dp_port_enable(port, false);
+ } else if (tb_port_is_pcie_down(port) ||
+ tb_port_is_pcie_up(port)) {
+ tb_pci_port_enable(port, false);
+ } else {
+ continue;
+ }
+
+ /* Cleanup path config space of protocol adapter */
+ for (i = TB_PATH_MIN_HOPID;
+ i <= port->config.max_in_hop_id; i++) {
+ ret = tb_path_deactivate_hop(port, i);
+ if (ret)
+ return ret;
+ }
+ }
+ } else {
+ struct tb_cfg_result res;
+
+ /* Thunderbolt 1 uses the "reset" config space packet */
+ res.err = tb_sw_write(sw, ((u32 *) &sw->config) + 2,
+ TB_CFG_SWITCH, 2, 2);
+ if (res.err)
+ return res.err;
+ res = tb_cfg_reset(sw->tb->ctl, tb_route(sw));
+ if (res.err > 0)
+ return -EIO;
+ else if (res.err < 0)
+ return res.err;
+ }
+
+ return 0;
+}
+
+static int tb_switch_reset_device(struct tb_switch *sw)
+{
+ return tb_port_reset(tb_switch_downstream_port(sw));
+}
+
+static bool tb_switch_enumerated(struct tb_switch *sw)
+{
+ u32 val;
+ int ret;
+
+ /*
+ * Read directly from the hardware because we use this also
+ * during system sleep where sw->config.enabled is already set
+ * by us.
+ */
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_3, 1);
+ if (ret)
+ return false;
+
+ return !!(val & ROUTER_CS_3_V);
+}
+
/**
- * tb_switch_reset() - reconfigure route, enable and send TB_CFG_PKG_RESET
- * @sw: Switch to reset
+ * tb_switch_reset() - Perform reset to the router
+ * @sw: Router to reset
+ *
+ * Issues reset to the router @sw. Can be used for any router. For host
+ * routers, resets all the downstream ports and cleans up path config
+ * spaces accordingly. For device routers issues downstream port reset
+ * through the parent router, so as side effect there will be unplug
+ * soon after this is finished.
+ *
+ * If the router is not enumerated does nothing.
*
- * Return: Returns 0 on success or an error code on failure.
+ * Returns %0 on success or negative errno in case of failure.
*/
int tb_switch_reset(struct tb_switch *sw)
{
- struct tb_cfg_result res;
+ int ret;
- if (sw->generation > 1)
+ /*
+ * We cannot access the port config spaces unless the router is
+ * already enumerated. If the router is not enumerated it is
+ * equal to being reset so we can skip that here.
+ */
+ if (!tb_switch_enumerated(sw))
return 0;
- tb_sw_dbg(sw, "resetting switch\n");
+ tb_sw_dbg(sw, "resetting\n");
+
+ if (tb_route(sw))
+ ret = tb_switch_reset_device(sw);
+ else
+ ret = tb_switch_reset_host(sw);
+
+ if (ret)
+ tb_sw_warn(sw, "failed to reset\n");
- res.err = tb_sw_write(sw, ((u32 *) &sw->config) + 2,
- TB_CFG_SWITCH, 2, 2);
- if (res.err)
- return res.err;
- res = tb_cfg_reset(sw->tb->ctl, tb_route(sw));
- if (res.err > 0)
- return -EIO;
- return res.err;
+ return ret;
}
/**
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -194,6 +194,8 @@ struct tb_regs_switch_header {
#define USB4_VERSION_MAJOR_MASK GENMASK(7, 5)
#define ROUTER_CS_1 0x01
+#define ROUTER_CS_3 0x03
+#define ROUTER_CS_3_V BIT(31)
#define ROUTER_CS_4 0x04
/* Used with the router cmuv field */
#define ROUTER_CS_4_CMUV_V1 0x10
Patches currently in stable-queue which might be from Sanath.S@xxxxxxx are
queue-6.6/thunderbolt-reset-topology-created-by-the-boot-firmware.patch
queue-6.6/thunderbolt-introduce-tb_port_reset.patch
queue-6.6/thunderbolt-introduce-tb_path_deactivate_hop.patch
queue-6.6/thunderbolt-make-tb_switch_reset-support-thunderbolt-2-3-and-usb4-routers.patch
