Patch "thunderbolt: Fix wake configurations after device unplug" has been added to the 6.1-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    thunderbolt: Fix wake configurations after device unplug

to the 6.1-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     thunderbolt-fix-wake-configurations-after-device-unplug.patch
and it can be found in the queue-6.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From c38fa07dc69f0b9e6f43ecab96dc7861a70c827c Mon Sep 17 00:00:00 2001
From: Gil Fine <gil.fine@xxxxxxxxxxxxxxx>
Date: Fri, 1 Mar 2024 15:22:53 +0200
Subject: thunderbolt: Fix wake configurations after device unplug

From: Gil Fine <gil.fine@xxxxxxxxxxxxxxx>

commit c38fa07dc69f0b9e6f43ecab96dc7861a70c827c upstream.

Currently we don't configure correctly the wake events after unplug of device
router. What can happen is that the downstream ports of host router will be
configured to wake on: USB4-wake and wake-on-disconnect, but not on
wake-on-connect. This may cause the later plugged device not to wake the
domain and fail in enumeration. Fix this by clearing downstream port's "USB4
Port is Configured" bit, after unplug of a device router.

Signed-off-by: Gil Fine <gil.fine@xxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/thunderbolt/switch.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -2880,22 +2880,29 @@ void tb_switch_unconfigure_link(struct t
 {
 	struct tb_port *up, *down;
 
-	if (sw->is_unplugged)
-		return;
 	if (!tb_route(sw) || tb_switch_is_icm(sw))
 		return;
 
+	/*
+	 * Unconfigure downstream port so that wake-on-connect can be
+	 * configured after router unplug. No need to unconfigure upstream port
+	 * since its router is unplugged.
+	 */
 	up = tb_upstream_port(sw);
-	if (tb_switch_is_usb4(up->sw))
-		usb4_port_unconfigure(up);
-	else
-		tb_lc_unconfigure_port(up);
-
 	down = up->remote;
 	if (tb_switch_is_usb4(down->sw))
 		usb4_port_unconfigure(down);
 	else
 		tb_lc_unconfigure_port(down);
+
+	if (sw->is_unplugged)
+		return;
+
+	up = tb_upstream_port(sw);
+	if (tb_switch_is_usb4(up->sw))
+		usb4_port_unconfigure(up);
+	else
+		tb_lc_unconfigure_port(up);
 }
 
 static void tb_switch_credits_init(struct tb_switch *sw)


Patches currently in stable-queue which might be from gil.fine@xxxxxxxxxxxxxxx are

queue-6.1/thunderbolt-avoid-notify-pm-core-about-runtime-pm-resume.patch
queue-6.1/thunderbolt-fix-wake-configurations-after-device-unplug.patch




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux