Patch "usb: dwc3-am62: Rename private data" has been added to the 6.1-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    usb: dwc3-am62: Rename private data

to the 6.1-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-dwc3-am62-rename-private-data.patch
and it can be found in the queue-6.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 1cc98e0629c2c8d5f612116e78c1579ccf55ef15
Author: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
Date:   Sat Jul 15 16:07:26 2023 +0200

    usb: dwc3-am62: Rename private data
    
    [ Upstream commit 3609699c32aa4f2710a6fe2b21afc6a9a3c66bc5 ]
    
    Rename dwc3_data to dwc3_am62 to make it consistent with other
    glue drivers, it's clearer that this is am62's specific.
    While there, do the same for data variable.
    
    Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
    Link: https://lore.kernel.org/r/ZLKoHhJvT+Y6aM+C@lenoch
    Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
    Stable-dep-of: 6661befe4100 ("usb: dwc3-am62: fix module unload/reload behavior")
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c
index 173cf3579c55d..726f96d257c8d 100644
--- a/drivers/usb/dwc3/dwc3-am62.c
+++ b/drivers/usb/dwc3/dwc3-am62.c
@@ -89,7 +89,7 @@
 
 #define DWC3_AM62_AUTOSUSPEND_DELAY	100
 
-struct dwc3_data {
+struct dwc3_am62 {
 	struct device *dev;
 	void __iomem *usbss;
 	struct clk *usb2_refclk;
@@ -115,19 +115,19 @@ static const int dwc3_ti_rate_table[] = {	/* in KHZ */
 	52000,
 };
 
-static inline u32 dwc3_ti_readl(struct dwc3_data *data, u32 offset)
+static inline u32 dwc3_ti_readl(struct dwc3_am62 *am62, u32 offset)
 {
-	return readl((data->usbss) + offset);
+	return readl((am62->usbss) + offset);
 }
 
-static inline void dwc3_ti_writel(struct dwc3_data *data, u32 offset, u32 value)
+static inline void dwc3_ti_writel(struct dwc3_am62 *am62, u32 offset, u32 value)
 {
-	writel(value, (data->usbss) + offset);
+	writel(value, (am62->usbss) + offset);
 }
 
-static int phy_syscon_pll_refclk(struct dwc3_data *data)
+static int phy_syscon_pll_refclk(struct dwc3_am62 *am62)
 {
-	struct device *dev = data->dev;
+	struct device *dev = am62->dev;
 	struct device_node *node = dev->of_node;
 	struct of_phandle_args args;
 	struct regmap *syscon;
@@ -139,16 +139,16 @@ static int phy_syscon_pll_refclk(struct dwc3_data *data)
 		return PTR_ERR(syscon);
 	}
 
-	data->syscon = syscon;
+	am62->syscon = syscon;
 
 	ret = of_parse_phandle_with_fixed_args(node, "ti,syscon-phy-pll-refclk", 1,
 					       0, &args);
 	if (ret)
 		return ret;
 
-	data->offset = args.args[0];
+	am62->offset = args.args[0];
 
-	ret = regmap_update_bits(data->syscon, data->offset, PHY_PLL_REFCLK_MASK, data->rate_code);
+	ret = regmap_update_bits(am62->syscon, am62->offset, PHY_PLL_REFCLK_MASK, am62->rate_code);
 	if (ret) {
 		dev_err(dev, "failed to set phy pll reference clock rate\n");
 		return ret;
@@ -161,32 +161,32 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *node = pdev->dev.of_node;
-	struct dwc3_data *data;
+	struct dwc3_am62 *am62;
 	int i, ret;
 	unsigned long rate;
 	u32 reg;
 
-	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
+	am62 = devm_kzalloc(dev, sizeof(*am62), GFP_KERNEL);
+	if (!am62)
 		return -ENOMEM;
 
-	data->dev = dev;
-	platform_set_drvdata(pdev, data);
+	am62->dev = dev;
+	platform_set_drvdata(pdev, am62);
 
-	data->usbss = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(data->usbss)) {
+	am62->usbss = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(am62->usbss)) {
 		dev_err(dev, "can't map IOMEM resource\n");
-		return PTR_ERR(data->usbss);
+		return PTR_ERR(am62->usbss);
 	}
 
-	data->usb2_refclk = devm_clk_get(dev, "ref");
-	if (IS_ERR(data->usb2_refclk)) {
+	am62->usb2_refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(am62->usb2_refclk)) {
 		dev_err(dev, "can't get usb2_refclk\n");
-		return PTR_ERR(data->usb2_refclk);
+		return PTR_ERR(am62->usb2_refclk);
 	}
 
 	/* Calculate the rate code */
-	rate = clk_get_rate(data->usb2_refclk);
+	rate = clk_get_rate(am62->usb2_refclk);
 	rate /= 1000;	// To KHz
 	for (i = 0; i < ARRAY_SIZE(dwc3_ti_rate_table); i++) {
 		if (dwc3_ti_rate_table[i] == rate)
@@ -198,20 +198,20 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	data->rate_code = i;
+	am62->rate_code = i;
 
 	/* Read the syscon property and set the rate code */
-	ret = phy_syscon_pll_refclk(data);
+	ret = phy_syscon_pll_refclk(am62);
 	if (ret)
 		return ret;
 
 	/* VBUS divider select */
-	data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
-	reg = dwc3_ti_readl(data, USBSS_PHY_CONFIG);
-	if (data->vbus_divider)
+	am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
+	reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG);
+	if (am62->vbus_divider)
 		reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT;
 
-	dwc3_ti_writel(data, USBSS_PHY_CONFIG, reg);
+	dwc3_ti_writel(am62, USBSS_PHY_CONFIG, reg);
 
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
@@ -219,7 +219,7 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 	 * Don't ignore its dependencies with its children
 	 */
 	pm_suspend_ignore_children(dev, false);
-	clk_prepare_enable(data->usb2_refclk);
+	clk_prepare_enable(am62->usb2_refclk);
 	pm_runtime_get_noresume(dev);
 
 	ret = of_platform_populate(node, NULL, NULL, dev);
@@ -229,9 +229,9 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 	}
 
 	/* Set mode valid bit to indicate role is valid */
-	reg = dwc3_ti_readl(data, USBSS_MODE_CONTROL);
+	reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL);
 	reg |= USBSS_MODE_VALID;
-	dwc3_ti_writel(data, USBSS_MODE_CONTROL, reg);
+	dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg);
 
 	/* Setting up autosuspend */
 	pm_runtime_set_autosuspend_delay(dev, DWC3_AM62_AUTOSUSPEND_DELAY);
@@ -241,7 +241,7 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 	return 0;
 
 err_pm_disable:
-	clk_disable_unprepare(data->usb2_refclk);
+	clk_disable_unprepare(am62->usb2_refclk);
 	pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
 	return ret;
@@ -258,18 +258,18 @@ static int dwc3_ti_remove_core(struct device *dev, void *c)
 static int dwc3_ti_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct dwc3_data *data = platform_get_drvdata(pdev);
+	struct dwc3_am62 *am62 = platform_get_drvdata(pdev);
 	u32 reg;
 
 	device_for_each_child(dev, NULL, dwc3_ti_remove_core);
 
 	/* Clear mode valid bit */
-	reg = dwc3_ti_readl(data, USBSS_MODE_CONTROL);
+	reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL);
 	reg &= ~USBSS_MODE_VALID;
-	dwc3_ti_writel(data, USBSS_MODE_CONTROL, reg);
+	dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg);
 
 	pm_runtime_put_sync(dev);
-	clk_disable_unprepare(data->usb2_refclk);
+	clk_disable_unprepare(am62->usb2_refclk);
 	pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
 
@@ -280,18 +280,18 @@ static int dwc3_ti_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int dwc3_ti_suspend_common(struct device *dev)
 {
-	struct dwc3_data *data = dev_get_drvdata(dev);
+	struct dwc3_am62 *am62 = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(data->usb2_refclk);
+	clk_disable_unprepare(am62->usb2_refclk);
 
 	return 0;
 }
 
 static int dwc3_ti_resume_common(struct device *dev)
 {
-	struct dwc3_data *data = dev_get_drvdata(dev);
+	struct dwc3_am62 *am62 = dev_get_drvdata(dev);
 
-	clk_prepare_enable(data->usb2_refclk);
+	clk_prepare_enable(am62->usb2_refclk);
 
 	return 0;
 }




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux