This is a note to let you know that I've just added the patch titled
mmc: sdhci-omap: re-tuning is needed after a pm transition to support emmc HS200 mode
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-sdhci-omap-re-tuning-is-needed-after-a-pm-transition-to-support-emmc-hs200-mode.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From f9e2a5b00a35f2c064dc679808bc8db5cc779ed6 Mon Sep 17 00:00:00 2001
From: Romain Naour <romain.naour@xxxxxxx>
Date: Sat, 16 Mar 2024 00:44:44 +0100
Subject: mmc: sdhci-omap: re-tuning is needed after a pm transition to support emmc HS200 mode
From: Romain Naour <romain.naour@xxxxxxx>
commit f9e2a5b00a35f2c064dc679808bc8db5cc779ed6 upstream.
"PM runtime functions" was been added in sdhci-omap driver in commit
f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions") along
with "card power off and enable aggressive PM" in commit 3edf588e7fe0
("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM").
Since then, the sdhci-omap driver doesn't work using mmc-hs200 mode
due to the tuning values being lost during a pm transition.
As for the sdhci_am654 driver, request a new tuning sequence before
suspend (sdhci_omap_runtime_suspend()), otherwise the device will
trigger cache flush error:
mmc1: cache flush error -110 (ETIMEDOUT)
mmc1: error -110 doing aggressive suspend
followed by I/O errors produced by fdisk -l /dev/mmcblk1boot1:
I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1
prio class 2
I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1
prio class 2
I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1
prio class 2
Buffer I/O error on dev mmcblk1boot1, logical block 8048, async page read
I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1
prio class 2
Buffer I/O error on dev mmcblk1boot0, logical block 8048, async page read
Don't re-tune if auto retuning is supported in HW (when SDHCI_TUNING_MODE_3
is available).
Link: https://lore.kernel.org/all/2e5f1997-564c-44e4-b357-6343e0dae7ab@xxxxxxxx
Fixes: f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions")
Signed-off-by: Romain Naour <romain.naour@xxxxxxx>
Reviewed-by: Tony Lindgren <tony@xxxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20240315234444.816978-1-romain.naour@xxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-omap.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -1442,6 +1442,9 @@ static int __maybe_unused sdhci_omap_run
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+ if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+ mmc_retune_needed(host->mmc);
+
if (omap_host->con != -EINVAL)
sdhci_runtime_suspend_host(host);
Patches currently in stable-queue which might be from romain.naour@xxxxxxx are
queue-6.1/mmc-sdhci-omap-re-tuning-is-needed-after-a-pm-transition-to-support-emmc-hs200-mode.patch
