This is a note to let you know that I've just added the patch titled
ahci: asm1064: correct count of reported ports
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ahci-asm1064-correct-count-of-reported-ports.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 78c14b56a1f75ae1d2e22d98d8bafb5013bb83e0
Author: Andrey Jr. Melnikov <temnota.am@xxxxxxxxx>
Date: Wed Feb 14 17:57:57 2024 +0100
ahci: asm1064: correct count of reported ports
[ Upstream commit 9815e39617541ef52d0dfac4be274ad378c6dc09 ]
The ASM1064 SATA host controller always reports wrongly,
that it has 24 ports. But in reality, it only has four ports.
before:
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
after:
ahci 0000:04:00.0: ASM1064 has only four ports
ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
Signed-off-by: "Andrey Jr. Melnikov" <temnota.am@xxxxxxxxx>
Signed-off-by: Niklas Cassel <cassel@xxxxxxxxxx>
Stable-dep-of: 6cd8adc3e189 ("ahci: asm1064: asm1166: don't limit reported ports")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 1790a2ecb9fac..9de1731b6b444 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -671,9 +671,17 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets");
static void ahci_pci_save_initial_config(struct pci_dev *pdev,
struct ahci_host_priv *hpriv)
{
- if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) {
- dev_info(&pdev->dev, "ASM1166 has only six ports\n");
- hpriv->saved_port_map = 0x3f;
+ if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) {
+ switch (pdev->device) {
+ case 0x1166:
+ dev_info(&pdev->dev, "ASM1166 has only six ports\n");
+ hpriv->saved_port_map = 0x3f;
+ break;
+ case 0x1064:
+ dev_info(&pdev->dev, "ASM1064 has only four ports\n");
+ hpriv->saved_port_map = 0xf;
+ break;
+ }
}
if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
