This is a note to let you know that I've just added the patch titled
arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL board
to the 5.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-imx8mm-kontron-disable-pullups-for-onboard.patch
and it can be found in the queue-5.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 70073b8748f06481704a5647a5d4727889872826
Author: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
Date: Mon Jan 8 09:49:01 2024 +0100
arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL board
[ Upstream commit 162aadaa0df8217b0cc49d919dd00022fef65e78 ]
These signals are actively driven by the SoC or by the onboard
transceiver. There's no need to enable the internal pull resistors
and due to silicon errata ERR050080 let's disable the internal ones
to prevent any unwanted behavior in case they wear out.
Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index 362f9360b4a51..67e768032320a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -288,19 +288,19 @@ MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140
- MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140
- MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140
- MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140
+ MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x0
+ MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x0
+ MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x0
+ MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x0
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140
- MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140
- MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140
- MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140
+ MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0
+ MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0
+ MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0
+ MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0
>;
};
