This is a note to let you know that I've just added the patch titled
leds: sgm3140: Add missing timer cleanup and flash gpio control
to the 6.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
leds-sgm3140-add-missing-timer-cleanup-and-flash-gpi.patch
and it can be found in the queue-6.7 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 6cf56e2f782b5df0af9e1c54837957d5850fb142
Author: Ondrej Jirman <megi@xxxxxx>
Date: Sat Feb 17 20:11:30 2024 +0100
leds: sgm3140: Add missing timer cleanup and flash gpio control
[ Upstream commit 205c29887a333ee4b37596e6533373e38cb23947 ]
Enabling strobe and then setting brightness to 0 causes the driver to enter
invalid state after strobe end timer fires. We should cancel strobe mode
resources when changing brightness (aka torch mode).
Fixes: cef8ec8cbd21 ("leds: add sgm3140 driver")
Signed-off-by: Ondrej Jirman <megi@xxxxxx>
Link: https://lore.kernel.org/r/20240217191133.1757553-1-megi@xxxxxx
Signed-off-by: Lee Jones <lee@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/leds/flash/leds-sgm3140.c b/drivers/leds/flash/leds-sgm3140.c
index eb648ff54b4e5..db0ac6641954e 100644
--- a/drivers/leds/flash/leds-sgm3140.c
+++ b/drivers/leds/flash/leds-sgm3140.c
@@ -114,8 +114,11 @@ static int sgm3140_brightness_set(struct led_classdev *led_cdev,
"failed to enable regulator: %d\n", ret);
return ret;
}
+ gpiod_set_value_cansleep(priv->flash_gpio, 0);
gpiod_set_value_cansleep(priv->enable_gpio, 1);
} else {
+ del_timer_sync(&priv->powerdown_timer);
+ gpiod_set_value_cansleep(priv->flash_gpio, 0);
gpiod_set_value_cansleep(priv->enable_gpio, 0);
ret = regulator_disable(priv->vin_regulator);
if (ret) {
