This is a note to let you know that I've just added the patch titled
wifi: rtw88: 8821cu: Fix firmware upload fail
to the 6.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
wifi-rtw88-8821cu-fix-firmware-upload-fail.patch
and it can be found in the queue-6.7 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 46f29089d937a69dd354eaffed1f1c3ad4325b5c
Author: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
Date: Fri Mar 1 00:32:45 2024 +0200
wifi: rtw88: 8821cu: Fix firmware upload fail
[ Upstream commit 41a7acb7dde8395f52a707bbba7712a898dfafb0 ]
RTL8822CU, RTL8822BU, and RTL8821CU need an extra register write after
reading and writing certain addresses.
Without this, the firmware upload fails approximately more than 50% of
the time.
Tested with RTL8811CU (Tenda U9 V2.0) which is the same as RTL8821CU
but without Bluetooth.
Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
Acked-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxx>
Link: https://msgid.link/f12ed39d-28e8-4b8b-8d22-447bcf295afc@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/wireless/realtek/rtw88/usb.c b/drivers/net/wireless/realtek/rtw88/usb.c
index e6ab1ac6d7093..a0188511099a1 100644
--- a/drivers/net/wireless/realtek/rtw88/usb.c
+++ b/drivers/net/wireless/realtek/rtw88/usb.c
@@ -33,6 +33,36 @@ static void rtw_usb_fill_tx_checksum(struct rtw_usb *rtwusb,
rtw_tx_fill_txdesc_checksum(rtwdev, &pkt_info, skb->data);
}
+static void rtw_usb_reg_sec(struct rtw_dev *rtwdev, u32 addr, __le32 *data)
+{
+ struct rtw_usb *rtwusb = rtw_get_usb_priv(rtwdev);
+ struct usb_device *udev = rtwusb->udev;
+ bool reg_on_section = false;
+ u16 t_reg = 0x4e0;
+ u8 t_len = 1;
+ int status;
+
+ /* There are three sections:
+ * 1. on (0x00~0xFF; 0x1000~0x10FF): this section is always powered on
+ * 2. off (< 0xFE00, excluding "on" section): this section could be
+ * powered off
+ * 3. local (>= 0xFE00): usb specific registers section
+ */
+ if (addr <= 0xff || (addr >= 0x1000 && addr <= 0x10ff))
+ reg_on_section = true;
+
+ if (!reg_on_section)
+ return;
+
+ status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ RTW_USB_CMD_REQ, RTW_USB_CMD_WRITE,
+ t_reg, 0, data, t_len, 500);
+
+ if (status != t_len && status != -ENODEV)
+ rtw_err(rtwdev, "%s: reg 0x%x, usb write %u fail, status: %d\n",
+ __func__, t_reg, t_len, status);
+}
+
static u32 rtw_usb_read(struct rtw_dev *rtwdev, u32 addr, u16 len)
{
struct rtw_usb *rtwusb = rtw_get_usb_priv(rtwdev);
@@ -58,6 +88,11 @@ static u32 rtw_usb_read(struct rtw_dev *rtwdev, u32 addr, u16 len)
rtw_err(rtwdev, "read register 0x%x failed with %d\n",
addr, ret);
+ if (rtwdev->chip->id == RTW_CHIP_TYPE_8822C ||
+ rtwdev->chip->id == RTW_CHIP_TYPE_8822B ||
+ rtwdev->chip->id == RTW_CHIP_TYPE_8821C)
+ rtw_usb_reg_sec(rtwdev, addr, data);
+
return le32_to_cpu(*data);
}
@@ -102,6 +137,11 @@ static void rtw_usb_write(struct rtw_dev *rtwdev, u32 addr, u32 val, int len)
if (ret < 0 && ret != -ENODEV && count++ < 4)
rtw_err(rtwdev, "write register 0x%x failed with %d\n",
addr, ret);
+
+ if (rtwdev->chip->id == RTW_CHIP_TYPE_8822C ||
+ rtwdev->chip->id == RTW_CHIP_TYPE_8822B ||
+ rtwdev->chip->id == RTW_CHIP_TYPE_8821C)
+ rtw_usb_reg_sec(rtwdev, addr, data);
}
static void rtw_usb_write8(struct rtw_dev *rtwdev, u32 addr, u8 val)
