This is a note to let you know that I've just added the patch titled
arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0
to the 6.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-ti-k3-j7200-common-proc-board-modify-pinmu.patch
and it can be found in the queue-6.7 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 82ad96b6a430403601b7b873f197315c3ae9e024
Author: Bhavya Kapoor <b-kapoor@xxxxxx>
Date: Wed Feb 14 16:28:43 2024 +0530
arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0
[ Upstream commit 566feddd2ba5e29d9ccab36d6508592ae563f275 ]
WKUP_PADCONFIG registers for wkup_uart0 and mcu_uart0 lies
under wkup_pmx2 for J7200. Thus, modify pinmux for both
of them.
Fixes: 3709ea7f960e ("arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux")
Signed-off-by: Bhavya Kapoor <b-kapoor@xxxxxx>
Link: https://lore.kernel.org/r/20240214105846.1096733-2-b-kapoor@xxxxxx
Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index cee2b4b0eb87d..53594c5fb8e8f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -91,24 +91,25 @@ vdd_sd_dv: gpio-regulator-TLV71033 {
};
&wkup_pmx0 {
+};
+
+&wkup_pmx2 {
mcu_uart0_pins_default: mcu-uart0-default-pins {
pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
- J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
- J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
- J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+ J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
+ J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+ J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
+ J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
>;
};
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
- J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+ J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+ J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
>;
};
-};
-&wkup_pmx2 {
mcu_cpsw_pins_default: mcu-cpsw-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
