This is a note to let you know that I've just added the patch titled
dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
dmaengine-dw-edma-edma-add-sync-read-before-starting.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit fcc7b40366319dc1145c78674aa398b5042c7207
Author: Kory Maincent <kory.maincent@xxxxxxxxxxx>
Date: Mon Jan 29 17:26:02 2024 +0100
dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
[ Upstream commit bbcc1c83f343e580c3aa1f2a8593343bf7b55bba ]
The Linked list element and pointer are not stored in the same memory as
the eDMA controller register. If the doorbell register is toggled before
the full write of the linked list a race condition error will occur.
In remote setup we can only use a readl to the memory to assure the full
write has occurred.
Fixes: 7e4b8a4fbe2c ("dmaengine: Add Synopsys eDMA IP version 0 support")
Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-6-8e8c1acb7a46@xxxxxxxxxxx
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
index b38786f0ad799..b75fdaffad9a4 100644
--- a/drivers/dma/dw-edma/dw-edma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
@@ -346,6 +346,20 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
dw_edma_v0_write_ll_link(chunk, i, control, chunk->ll_region.paddr);
}
+static void dw_edma_v0_sync_ll_data(struct dw_edma_chunk *chunk)
+{
+ /*
+ * In case of remote eDMA engine setup, the DW PCIe RP/EP internal
+ * configuration registers and application memory are normally accessed
+ * over different buses. Ensure LL-data reaches the memory before the
+ * doorbell register is toggled by issuing the dummy-read from the remote
+ * LL memory in a hope that the MRd TLP will return only after the
+ * last MWr TLP is completed
+ */
+ if (!(chunk->chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL))
+ readl(chunk->ll_region.vaddr.io);
+}
+
static void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
{
struct dw_edma_chan *chan = chunk->chan;
@@ -412,6 +426,9 @@ static void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
SET_CH_32(dw, chan->dir, chan->id, llp.msb,
upper_32_bits(chunk->ll_region.paddr));
}
+
+ dw_edma_v0_sync_ll_data(chunk);
+
/* Doorbell */
SET_RW_32(dw, chan->dir, doorbell,
FIELD_PREP(EDMA_V0_DOORBELL_CH_MASK, chan->id));
