This is a note to let you know that I've just added the patch titled
accel/ivpu: Don't enable any tiles by default on VPU40xx
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
accel-ivpu-don-t-enable-any-tiles-by-default-on-vpu40xx.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From eb0d253ff9c74dee30aa92fe460b825eb28acd73 Mon Sep 17 00:00:00 2001
From: Andrzej Kacprowski <Andrzej.Kacprowski@xxxxxxxxx>
Date: Tue, 20 Feb 2024 14:16:24 +0100
Subject: accel/ivpu: Don't enable any tiles by default on VPU40xx
From: Andrzej Kacprowski <Andrzej.Kacprowski@xxxxxxxxx>
commit eb0d253ff9c74dee30aa92fe460b825eb28acd73 upstream.
There is no point in requesting 1 tile on VPU40xx as the FW will
probably need more tiles to run workloads, so it will have to
reconfigure PLL anyway. Don't enable any tiles and allow the FW to
perform initial tile configuration.
This improves NPU boot stability as the tiles are always enabled only
by the FW from the same initial state.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@xxxxxxxxx>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxxxxxxxx>
Reviewed-by: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220131624.1447813-1-jacek.lawrynowicz@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/accel/ivpu/ivpu_hw_40xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/accel/ivpu/ivpu_hw_40xx.c b/drivers/accel/ivpu/ivpu_hw_40xx.c
index 1c995307c113..a1523d0b1ef3 100644
--- a/drivers/accel/ivpu/ivpu_hw_40xx.c
+++ b/drivers/accel/ivpu/ivpu_hw_40xx.c
@@ -24,7 +24,7 @@
#define SKU_HW_ID_SHIFT 16u
#define SKU_HW_ID_MASK 0xffff0000u
-#define PLL_CONFIG_DEFAULT 0x1
+#define PLL_CONFIG_DEFAULT 0x0
#define PLL_CDYN_DEFAULT 0x80
#define PLL_EPP_DEFAULT 0x80
#define PLL_REF_CLK_FREQ (50 * 1000000)
--
2.44.0
Patches currently in stable-queue which might be from Andrzej.Kacprowski@xxxxxxxxx are
queue-6.6/accel-ivpu-don-t-enable-any-tiles-by-default-on-vpu40xx.patch
