This is a note to let you know that I've just added the patch titled
serial: 8250_exar: Fill in rs485_supported
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-8250_exar-fill-in-rs485_supported.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 1910a9007d9f9e54ef6cc575ea48e8b7f47a54e6
Author: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Date: Mon Jun 6 13:04:04 2022 +0300
serial: 8250_exar: Fill in rs485_supported
[ Upstream commit 59c221f8e1269278161313048c71929c9950b2c4 ]
Add information on supported serial_rs485 features.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220606100433.13793-8-ilpo.jarvinen@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Stable-dep-of: 0c2a5f471ce5 ("serial: 8250_exar: Set missing rs485_supported flag")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 5c2adf14049b..19de9f535c67 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -123,6 +123,7 @@ struct exar8250;
struct exar8250_platform {
int (*rs485_config)(struct uart_port *, struct serial_rs485 *);
+ const struct serial_rs485 *rs485_supported;
int (*register_gpio)(struct pci_dev *, struct uart_8250_port *);
};
@@ -423,9 +424,14 @@ static int generic_rs485_config(struct uart_port *port,
return 0;
}
+static const struct serial_rs485 generic_rs485_supported = {
+ .flags = SER_RS485_ENABLED,
+};
+
static const struct exar8250_platform exar8250_default_platform = {
.register_gpio = xr17v35x_register_gpio,
.rs485_config = generic_rs485_config,
+ .rs485_supported = &generic_rs485_supported,
};
static int iot2040_rs485_config(struct uart_port *port,
@@ -461,6 +467,10 @@ static int iot2040_rs485_config(struct uart_port *port,
return generic_rs485_config(port, rs485);
}
+static const struct serial_rs485 iot2040_rs485_supported = {
+ .flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS,
+};
+
static const struct property_entry iot2040_gpio_properties[] = {
PROPERTY_ENTRY_U32("exar,first-pin", 10),
PROPERTY_ENTRY_U32("ngpios", 1),
@@ -485,6 +495,7 @@ static int iot2040_register_gpio(struct pci_dev *pcidev,
static const struct exar8250_platform iot2040_platform = {
.rs485_config = iot2040_rs485_config,
+ .rs485_supported = &iot2040_rs485_supported,
.register_gpio = iot2040_register_gpio,
};
@@ -522,6 +533,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
port->port.uartclk = baud * 16;
port->port.rs485_config = platform->rs485_config;
+ port->port.rs485_supported = platform->rs485_supported;
/*
* Setup the UART clock for the devices on expansion slot to
