This is a note to let you know that I've just added the patch titled ARM: dts: imx7d: Fix coresight funnel ports to the 6.6-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-dts-imx7d-fix-coresight-funnel-ports.patch and it can be found in the queue-6.6 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit b9add6c4aebb707c0ef0a324d23f8671ec80d8ba Author: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> Date: Thu Oct 12 10:15:53 2023 +0200 ARM: dts: imx7d: Fix coresight funnel ports [ Upstream commit 0d4ac04fa7c3f6dc263dba6f575a2ec7a2d4eca8 ] imx7d uses two ports for 'in-ports', so the syntax port@<num> has to be used. imx7d has both port and port@1 nodes present, raising these error: funnel@30041000: in-ports: More than one condition true in oneOf schema funnel@30041000: Unevaluated properties are not allowed ('in-ports' was unexpected) Fix this by also using port@0 for imx7s as well. Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi index 4b94b8afb55d..0484e349e064 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi @@ -217,9 +217,6 @@ fec2: ethernet@30bf0000 { }; &ca_funnel_in_ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { reg = <1>; ca_funnel_in_port1: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi index bc79163c49b5..2e3513b7111e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi @@ -190,7 +190,11 @@ funnel@30041000 { clock-names = "apb_pclk"; ca_funnel_in_ports: in-ports { - port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; ca_funnel_in_port0: endpoint { remote-endpoint = <&etm0_out_port>; };